The Nebula Mars 3 Air takes the top spot for phones: it plays Netflix on its own, accepts Android casts and measures about 383 ANSI lumens on a 52 Wh battery, at 3.7 lb. For an iPhone and AirPlay 2, read the Samsung Freestyle 2nd Gen entry. We compared eight projectors on how each receives a phone.
Pick the Mars 3 Air for built-in Netflix and Android casting.
Pick the Samsung Freestyle 2nd Gen for AirPlay 2 from an iPhone.
Skip both for a lit room: the projector guide starts at 1,000 lumens.
Key takeaways for phone owners
- No phone is a projector. A "phone projector" is a small projector you feed from a phone. The two best-known projectors sold as part of a phone were both dim: 15 lumens on the 2012 Samsung Galaxy Beam and about 50 lumens on the Moto Insta-Share Projector mod.
- There are three ways in. A wireless cast (Google Cast, AirPlay 2, Miracast), a cable from the phone's USB-C port, or a built-in app that plays video without the phone.
- Netflix is the trap. Netflix says AirPlay is not supported, and phone casting now works only on a short list of older Google Cast devices. An app inside the projector is the safe route.
- Brightness drops fast with size. A 110 lumen pocket projector gives about 23 foot-lamberts on a 40 inch picture and about 10 at 60 inches, in a dark room.
- Weight spans 0.3 lb to 4.7 lb in this guide. The discontinued Yaber Pico T1, kept as a reference point, fits a pocket; the heavier models are bag projectors.
- Nothing here was tested by us. Every figure comes from published pages, and where two pages disagree the text says so.
Our picks at a glance
- 1Nebula Mars 3 Airan Android phone, a bedroom wall, a dorm or a tent, at 30 to 100 inchesCheck price
- 2XGIMI MoGo 3 Proan Android phone, a desk or a nightstand, 40 to 80 inchesCheck price
- 3XGIMI MoGo 4a bag projector with real speakers, 40 to 80 inchesCheck price
How do the eight phone projectors stack up?
Eight models are enough to cover the three ways a phone can talk to a projector. The table shows weight, brightness and resolution first, because they decide the picture; the next table covers the phone side. Brightness lists the maker rating, with a published measurement when one exists. All figures come from the pages listed under Sources.
| Model | Best for | Brightness | Resolution | Weight | Power |
|---|---|---|---|---|---|
| Nebula Mars 3 Air | Best overall | 400 ANSI rated, 372 to 399 measured | 1080p | 3.7 lb | 52 Wh battery |
| LG CineBeam Q (discontinued, reference) | iPhone, USB-C cable | About 500 ANSI rated, 356 to 483 measured | 4K (pixel shift) | 3.3 lb | 65 W plug, no battery |
| XGIMI MoGo 3 Pro | Android casting, light bag | 450 ISO rated | 1080p | 2.4 lb | USB-C power, power bank |
| XGIMI MoGo 4 | Newest MoGo, speakers | 450 ISO rated | 1080p | 2.9 lb | 71.28 Wh, 2 to 2.5 h |
| JMGO PicoFlix | Netflix, long battery | 450 ANSI rated | 1080p | 3.3 lb | About 4 h battery |
| Samsung Freestyle 2nd Gen | AirPlay 2, light | 230 ANSI | 1080p | 1.8 lb | 50 W plug, no battery |
| Nebula Capsule 3 Laser | Travel, laser life | 300 ANSI rated, 302 to 341 measured | 1080p | 2.1 lb | 52 Wh battery |
| Yaber Pico T1 (discontinued, reference) | Pocket, cheapest class | 110 ANSI | 960 x 540 | 0.3 lb | Power bank |
The order starts with the projector that needs the fewest steps from a phone. The sections below take each model, then the phone questions that decide whether a projector suits you.
Which single phone projector should most people buy?
The Nebula Mars 3 Air suits most buyers because it joins a native Netflix app, Android casting, a battery and a lab brightness close to its rating. Buy the Samsung Freestyle 2nd Gen if your phone is an iPhone and you want AirPlay 2 in a 1.8 lb box (Netflix not confirmed by the maker; see projector for Netflix). A cable from an iPhone 15, 16 or 17 (not the 16e or 17e) needs a projector with a DisplayPort USB-C port: the LG CineBeam Q had one, but ProjectorCentral lists it as discontinued, so it is only a reference point here. Our portable projector guide covers the same size class without the phone focus.
Which phone connection does each projector support?
Read this table before the model write-ups. It separates what the maker or ProjectorCentral lists from what we could not confirm. "Not listed" means the source page does not name the feature, not that the feature is absent.
| Model | Android | iPhone | USB-C video from phone | Netflix app |
|---|---|---|---|---|
| Nebula Mars 3 Air | Chromecast-enabled apps and the Nebula Cast app | Not confirmed | No (ProjectorCentral lists it as a con) | Yes, Google TV |
| LG CineBeam Q (discontinued) | Screen Share | AirPlay 2 | Yes, one DisplayPort USB-C port | Yes, webOS |
| XGIMI MoGo 3 Pro | Google Cast | Not listed | Not specified (USB-C is for power) | Native support listed |
| XGIMI MoGo 4 | Google Cast | Not listed | Not listed (USB-C is for power) | Built in, per XGIMI (ProjectorCentral does not name it) |
| JMGO PicoFlix | Google Cast | Not listed | Not stated | Native support listed |
| Samsung Freestyle 2nd Gen | SmartThings (Samsung's marketing) | AirPlay 2 (Samsung support page) | Not listed | Not confirmed |
| Nebula Capsule 3 Laser | Casts from computers; phone not confirmed | Not confirmed | No (alternate mode video unsupported, 2023 version) | 2023: no authorized app. 2024: Netflix on Google TV |
| Yaber Pico T1 (discontinued) | Miracast | AirPlay and Eshare listed | Not listed | Not listed |
Notice what the table does not say. Only the LG CineBeam Q lists a USB-C video port together with a Netflix app, and it also lists AirPlay 2. For iPhones with USB-C the cable route is wider than that, because any projector with an HDMI input takes an adapter, and the Freestyle 2nd Gen has a Micro HDMI input. For wireless, the choice is small: the LG, the Samsung or the Yaber.
Which projector matches your phone and your room?
Pick the row that matches your phone and your room. Screen sizes assume a dark room.
| Your situation | Picture size | Buy | Why |
|---|---|---|---|
| Android phone, one box, Netflix on its own | 60 to 100 in | Nebula Mars 3 Air | 383 ANSI lm measured, 52 Wh, Google TV |
| iPhone with AirPlay, smallest box | 30 to 100 in | Samsung Freestyle 2nd Gen | 1.8 lb, AirPlay 2 |
| Android casting, lightest bag | 40 to 80 in | XGIMI MoGo 3 Pro | 2.4 lb, Google Cast, Netflix |
| Longest runtime for a movie | 60 to 100 in | JMGO PicoFlix | About 4 h, 450 ANSI lm |
| Travel with a laser engine | 40 to 80 in | Nebula Capsule 3 Laser | 2.1 lb, 52 Wh |
| Newest XGIMI with speakers | 40 to 80 in | XGIMI MoGo 4 | 2 x 6 W, 20 ms input lag, Netflix built in |
The eight phone projectors in detail
Each entry gives the main numbers and what a phone can do with that projector. We print no prices; the buttons open the live offer.
Nebula Mars 3 Air: top pick overall
Anker's Mars 3 Air pairs a 1080p RGB LED engine (400 ANSI lumens rated) with Google TV, a 52 Wh battery and a 3.7 lb body. The lab range is 372 lumens in Movie mode up to 399 in Conference mode, so the 400 rating holds. Eco mode drops to 145 lumens for about 3 hours 10 minutes of battery, against 2.5 hours rated.
For phones, ProjectorCentral says you can cast from Chromecast-enabled apps and that Anker's Nebula Cast app can mirror the full screen of a device. It does not name the platforms the app supports, so check before you assume iPhone. It lacks a USB-C port for video, which ProjectorCentral lists as a con. Google TV supplies a working Netflix app with a dedicated remote key, so the phone is a remote and a mirror, not the source of the movie.
Right for: an Android phone, a bedroom wall, a dorm or a tent, at 30 to 100 inches. Skip it if you plan to plug an iPhone in by cable, or watch above 100 inches: ProjectorCentral says the image thins out beyond roughly 80 inches. Bigger batteries are covered in best battery powered projector.
LG CineBeam Q: a discontinued reference for the USB-C cable
The CineBeam Q is a 3.3 lb, 3.1 x 5.3 x 5.3 inch triple laser projector with a 4K pixel-shifting DLP chip, AirPlay 2, Android Screen Share and a DisplayPort USB-C port. ProjectorCentral measured 483 ANSI lumens in Brightest mode at minimum power and 402 in Standard, and the figure depends on the power setting: Standard mode gave 402, 309 and 232 lumens across its three settings. Retailer sheets list 500 ANSI lumens rated. It throws a 50 inch image from 4.3 feet and a 120 inch image from 10.5 feet (1.2:1).
This is the model with the clearest phone story. The reviewer connected phones through the USB-C port, webOS shows a Netflix button on the remote in ProjectorCentral's review (Netflix not confirmed by the maker, and the model is discontinued), and AirPlay 2 covers iOS and macOS. It has no battery and needs 65 W of power, so ProjectorCentral suggests a portable charger for travel. Input lag is 64.6 ms at 1080p/60, which is slow for games. The sound is a 3 W speaker. ProjectorCentral lists it as discontinued, so it is not one of our picks.
Useful as a comparison: it shows what a USB-C cable route needs (a DisplayPort USB-C port). Not a pick, because it is discontinued.
XGIMI MoGo 3 Pro: the light Android caster
The MoGo 3 Pro is a 2.4 lb 1080p projector rated at 450 ISO lumens, with Google TV, Google Cast and native Netflix support. ProjectorCentral lists a 0.23 inch DLP chip, HDR10, auto focus, auto keystone, 65 W power through USB-C so a power bank works, and HDMI and USB-A ports. It was released in September 2024 and is still listed as shipping.
For phones, Google Cast is the route: an Android phone sends a cast from a cast-enabled app. The USB-C port is described only as power, so we do not count it as a video input. No battery capacity is listed. 450 ISO lumens is a maker rating, and we found no lab measurement of it. ISO 21118 is the strictest lumen test, but the figure is still a claim, not a measurement. The brand page is the XGIMI range.
Right for: an Android phone, a desk or a nightstand, 40 to 80 inches. Skip it if you want AirPlay or a published brightness measurement.
XGIMI MoGo 4: the newer MoGo with speakers
The MoGo 4 weighs 2.9 lb, is rated at 450 ISO lumens and lists Google Cast, a 2 hour battery and two 6 W speakers. ProjectorCentral lists HDMI and USB-A ports, USB-C for power, and Google TV. It lists no USB-C video input, no AirPlay and no Miracast. ProjectorCentral does not name Netflix, but XGIMI's own page lists Google TV with licensed Netflix, so Netflix is built in on the maker's word. XGIMI lists a 71.28 Wh battery with up to 2.5 hours of video in Eco mode. For a phone owner the upgrade over the MoGo 3 Pro is the battery and the sound.
ProjectorCentral's figure, quoted in our portable projector guide, is 20 ms of input lag at 1080p/60, which is good for casting a game from a phone.
Right for: a bag projector with real speakers, 40 to 80 inches. Skip it if you need an iPhone cable.
JMGO PicoFlix: the long-battery Google TV pick
JMGO's PicoFlix runs about 4 hours on its battery, lists native Netflix, and is rated at 450 ANSI lumens for 3.3 lb of 1080p LED. The spec page names Google TV, Google Cast, a USB-C port, HDMI 2.1, a 25,000 hour light source and two 5 W speakers. It was released in October 2024. Retailer sheets list 2.9 to 3.3 lb, so treat the weight as about 3 lb.
Casting from an Android phone works through Google Cast, and Netflix runs in the projector's own app, which avoids the casting restrictions covered below. The USB-C port is listed as a port, with no video function named. We found no independent lab measurement of its lumens. Sister models sit on the JMGO range page.
Right for: a long movie from an Android phone with no outlet, 60 to 100 inches. Skip it if you want an iPhone cable or a measured brightness.
Samsung Freestyle 2nd Gen: the AirPlay 2 pick
At 1.8 lb and 230 ANSI lumens with no battery, the Freestyle 2nd Gen is the lightest unit here. ProjectorCentral gives a 1080p picture of 29.6 to 100.4 inches, a 5 W mono speaker and a 50 W adapter. It does not list AirPlay or Miracast, but Samsung's own support page says an iPhone connects through Control Center, Screen Mirroring, with both devices on the same Wi-Fi network. Samsung also warns that AirPlay may not be available in every region. The projector also has a Micro HDMI input, so a cable from an iPhone 15, 16 or 17 works through a USB-C to HDMI adapter and a Micro HDMI cable, without AirPlay.
For Android, Samsung markets SmartThings, and a retailer listing describes one-tap Tap View for Galaxy phones on Android 8.1 or higher. One review notes that ultrawide mirroring is limited to Samsung phones. Because Netflix does not support AirPlay, Netflix on the Freestyle is not confirmed by the maker; see projector for Netflix. More detail: Samsung Freestyle and Freestyle 2nd Gen.
Right for: an iPhone owner with an outlet nearby, 30 to 100 inches. Skip it if you need a battery or a bright picture: 230 ANSI lumens gives about 21.5 foot-lamberts on a 60 inch image and 12.1 at 80 inches.
Nebula Capsule 3 Laser: the travel pick, phone with a catch
Anker's Capsule 3 Laser is a 2.1 lb can-shaped unit: laser engine, 300 ANSI lumens rated, 52 Wh battery. Two versions share the name: the 2023 model on Android TV 11 and the August 2024 model on Google TV with Netflix (per Notebookcheck and Anker Japan). The lab readings below come from the 2023 model, on ProjectorCentral were 341 ANSI lumens (Custom) and 302 (Standard) from the wall, then 192 (Standard) on battery. Runtime was about 2 hours 4 minutes.
The phone story is the weakest of the group. ProjectorCentral says it does not work with alternate mode video from a phone or tablet, its USB-C port is mainly for power, and Google Cast is not built in; it can take wireless casts from computers, and works with an external Chromecast through HDMI. The 2023 version has no authorized Netflix app, so add a streaming stick, which adds a second device. The 2024 Google TV version has Netflix built in, though we found no phone-casting detail for it. See the Nebula Capsule 3 Laser page and the Capsule family.
Right for: a travel projector you pair with a streaming stick, 40 to 80 inches. Skip it if you want a phone to connect directly.
Yaber Pico T1: a discontinued pocket reference
The Pico T1 weighs 0.3 lb and gives 110 ANSI lumens at 960 x 540, in a body 0.52 x 2.95 x 5.91 inches. ProjectorCentral lists a 1.20:1 throw ratio, a 10 to 100 inch image from 0.9 to 8.7 feet, Miracast on the spec sheet, AirPlay and Eshare in the highlights, HDMI, two USB-A ports and a 1.5 W mono speaker. It runs from a power bank rather than a built-in battery. It was released in November 2022 and discontinued in March 2025.
It is the only model here small enough for a coat pocket, and the only one with Miracast listed, which Android phones can use. The cost is the picture: 960 x 540 is below 1080p, and 110 lumens gives 23 foot-lamberts at 40 inches and 10 at 60 inches. At 100 inches the image is too dim to see in anything but a dark room. Because it is discontinued, it is a reference point and not one of our picks.
Useful as a comparison: it shows how little light a pocket model gives at 10 to 60 inches.
How does a phone projector work?
A phone projector shows what the phone sends it. The phone does the thinking, the projector shows the picture. The phone sends video over a cable, over Wi-Fi as a cast, or not at all when the projector plays the app itself. A small DLP or LED engine inside turns that signal into light. You do not need an app on the projector to make this work, only a compatible signal.
There are three paths, and they behave differently. The table sets the cost of each one for a phone owner.
| Path | What carries the picture | Needs Wi-Fi | Phone battery use | Main catch |
|---|---|---|---|---|
| Cable | USB-C DisplayPort or an HDMI adapter, up to 4K at 60 Hz on iPhone | No | Can charge through a multiport adapter | HDCP needed for streaming apps |
| Wireless cast | AirPlay 2, Google Cast or Miracast | Yes, same network for AirPlay 2 | The phone encodes the stream | Netflix blocks most casting |
| Built-in app | Google TV or webOS inside the projector | Yes, on the projector | Low: the phone is a remote | App list set by the maker |
Apple documents the cable route in its iPhone display guide: an iPhone with USB-C uses the DisplayPort protocol, and streaming apps may ask for HDCP.
Because of that last path, the cast route matters less than it seems. Step-by-step connection instructions live on our phone connection guide, and the screen mirroring guide covers the settings.
A phone cannot project on its own, because its screen is lit from behind and has no lens; the no-cost box and magnifier trick is covered once on DIY phone projector at home.
What does the term phone projector cover?
A phone projector is a small projector built to take video from a phone. The term covers pocket projectors, mini projectors and portable projectors that cast or cable to a phone. Searches for a cell phone projector, a mobile projector or a smart phone projector mean the same thing. They are not the same as a "smart projector", which means a projector with its own apps.
Size is the dividing line, and the ranges below are our rule of thumb from the models in this guide. A pocket model is 0.3 to 2 lb and 110 to 300 lumens, a mini projector is 2 to 5 lb and 400 to 1,000 lumens, and a portable projector goes up to about 10 lb. Our mini projector guide covers the middle group, and the pocket projector guide the smallest.
Do phones have projectors?
Almost none do. The two best-known examples are the following, and neither is current. The Samsung Galaxy Beam (2012) had a built-in DLP projector rated at 15 lumens, with a 640 x 360 picture of up to 50 inches. The Moto Insta-Share Projector was a snap-on Moto Mod for the Moto Z family: about 50 lumens, 854 x 480 and up to 70 inches, with about an hour of battery.
| Product | Year | Brightness | Picture | Max size | Notes |
|---|---|---|---|---|---|
| Samsung Galaxy Beam | 2012 | 15 lumens | 640 x 360 | 50 in | Projector inside the phone |
| Moto Insta-Share Projector | 2016 | About 50 lumens | 854 x 480 | 70 in | Snap-on mod, about 1 hour of battery |
That answers which Samsung phone has a projector: the Galaxy Beam, and only that one. No current iPhone or Android phone has a built-in projector, so "what mobile phone has a projector" has no current answer. Do not buy a phone for this. A separate projector gives seven to twenty-seven times the light of the Beam (110 lumens against 15, or 400 against 15).
Can a phone be used as a projector?
No phone is a projector on its own, so the real choice is which projector to connect to it. A cell phone shows an image on its own screen. To enlarge it you need a lens and a strong light, and a phone screen emits too little light to throw a bright picture. That is why a phone placed against a magnifier makes a dim, small image.
Can a phone connect to a projector? Yes, and nearly every projector in this guide can receive one, through at least one of cable, cast or app. Which method depends on the phone: Android phones lean on Google Cast and Miracast, and iPhones use AirPlay or a cable.
Do phone projector apps work?
An app alone cannot make a projector. Apps for "phone projectors" fall into three groups: casting apps that send a screen to a projector, remote apps from the projector's maker, and tracing or flashlight apps that only show an image on the phone for you to draw over. The first two are real. The third group does not project anything.
The best phone projector app is the one the projector's maker supplies, because it knows the projector. Examples from our sources are Samsung SmartThings, Anker's Nebula Cast and the Google Home app for Google Cast. If you want apps on the projector itself, our Android projector app guide lists Android options, and projector apps to download covers the built-in stores.
Why does Netflix not work when I cast or mirror my phone?
Because Netflix limits it. Its help page says casting is available on Standard or Premium plans, only to a short list of devices: Chromecast (3rd generation or older, without a physical remote), Google Nest Hub displays, and select cast-enabled Vizio and Compal TVs. It also says AirPlay with iPhone and iPad is not supported, and that mirroring may not work in some apps. News reports from December 2025 say Netflix removed casting from phones to most TVs and streaming devices, and that ad-supported plans lose it entirely.
| Path | Works for Netflix? | What to do |
|---|---|---|
| Netflix app on the projector (Google TV models where the maker confirms Netflix) | Yes | Log in on the projector; use the phone as a remote |
| Google Cast from a phone | Only on the older devices Netflix lists | Do not count on it for a projector |
| AirPlay 2 from an iPhone | No, per Netflix | Use the projector app or a cable |
| Cable from the phone | Needs HDCP end to end | Use a USB-C adapter that supports HDMI 2.0 |
| Miracast from Android | Netflix warns some mirroring is unsupported | Test before a trip |
For the full fix list see why Netflix will not work on a projector.
Do cell phone projectors, smartphone projectors and DIY projectors work?
Commercial ones work as described above, with limits of brightness and size. DIY ones, built from a shoebox and a magnifying lens, work as a trick, not as a screen. A flashlight phone projector gives a small, dim image and cannot make a picture you would watch a film on. The materials for a DIY build and the steps are on DIY phone projector at home, where the build questions are answered once.
Are phone projectors any good?
For a bedroom, a dorm or a tent, yes. For a living room with the lights on, no. A good phone projector gives 300 to 450 lumens, 1080p and a 40 to 100 inch picture in a dark room. Brightness is the limit, and the table below shows how fast it falls as the picture grows.
| Picture size | Width | Distance at 1.2:1 | Yaber (110 lm, discontinued) | Freestyle (230 lm) | Mars 3 Air (383 lm) | LG Q (402 lm, discontinued) |
|---|---|---|---|---|---|---|
| 40 in | 34.9 in | 3.5 ft | 23.2 fL | 48.4 fL | 80.6 fL | 84.6 fL |
| 60 in | 52.3 in | 5.2 ft | 10.3 fL | 21.5 fL | 35.9 fL | 37.6 fL |
| 80 in | 69.7 in | 7.0 ft | 5.8 fL | 12.1 fL | 20.2 fL | 21.2 fL |
| 100 in | 87.2 in | 8.7 ft | 3.7 fL | 7.8 fL | 12.9 fL | 13.5 fL |
| 120 in | 104.6 in | 10.5 ft | 2.6 fL | 5.4 fL | 9.0 fL | 9.4 fL |
These are our calculations: lumens divided by the screen area in square feet, for a white wall or a 1.0 gain screen in a dark room. Real walls reflect less. Use the throw distance calculator for another size, and how many lumens you need for the target by room.
How do you use a phone projector on a wall?
Point it at a flat, light wall, set it at the distance in the table above, then send the phone screen. A 100 inch picture at a 1.2:1 throw ratio needs 8.7 feet; at 60 inches it needs 5.2 feet. Darken the room, because any phone projector under 500 lumens struggles beside a lit window.
- Place the projector on a shelf or a stack of books at the distance from the table.
- Power it. Plug in, or use a battery or power bank where the model allows it.
- Connect the phone by cable, cast or app, as in the connection table.
- Focus and keystone. Most models here have auto focus and auto keystone.
- Check the sound. Speakers run from 1.5 W to 12 W in total; add a Bluetooth speaker for a group.
A white wall works, but a pull-down screen sharpens the picture; see our projector on a wall guide and the portable screen guide. The full walk-through is in how to use and set up a projector.
How do you connect a phone to a projector?
Pick the model's native method: AirPlay 2 or a cable for iPhone, Google Cast, Miracast or a cable for Android. The short answer lives on our phone to projector connection guide, which covers cables, adapters and settings in order. For iPhones we also keep a page on the best projector for iPhone and one for Android phones.
Which phones connect to a projector, and how?
The iPhone 15, 16 and 17 models (but not the 16e or 17e, which have no USB-C video output, per Apple) and many Android phones with DisplayPort over USB-C connect by cable. Older iPhones use a Lightning Digital AV Adapter, according to Apple. Wirelessly, an iPhone uses AirPlay and an Android phone uses Google Cast or Miracast.
Does a phone projector need Wi-Fi?
Not always. A cable from the phone needs no network at all. Wireless casting does: Samsung says both the iPhone and the Freestyle must be on the same Wi-Fi network for AirPlay 2, and Google Cast works the same way through a shared network. Built-in apps like Netflix need internet on the projector. Pack a cable if the venue has poor Wi-Fi.
What is the best phone projector for different jobs?
Here is the verdict by job, with the number that decides it:
- Netflix without a stick: Nebula Mars 3 Air or JMGO PicoFlix.
- iPhone, cable: any projector with an HDMI input and a USB-C to HDMI adapter, including the Freestyle 2nd Gen through its Micro HDMI port, or a DisplayPort USB-C port (the discontinued LG CineBeam Q had one).
- iPhone, wireless: Samsung Freestyle 2nd Gen (AirPlay 2).
- Lightest bag: XGIMI MoGo 3 Pro (2.4 lb).
- Longest battery: JMGO PicoFlix (about 4 hours).
- Lightest in this guide: Samsung Freestyle 2nd Gen (1.8 lb).
More choices by phone are on the iPhone page and the AirPlay projector page. For cable-only buyers see USB-C projectors.
Where do you get a phone projector?
Buy from the maker's own store or a large retailer that handles returns, so you can send it back if casting fails. Use the Check price buttons above, which open the live offer. Check the return window, and avoid a discontinued model such as the Yaber Pico T1 or the LG CineBeam Q unless it comes with a warranty.
What should you budget for a phone projector?
It ranges from a low-cost pocket model to a premium 4K model, and we print no prices because they change daily. Each Check price button shows the current offer. As a rule, brightness, 4K and a battery are what raise the price; weight and a pocket body are what lower it. Our projector cost guide breaks down the tiers.
What is phone projection in a Kia or Hyundai?
It is a car feature, not a projector. Kia's owner's manuals use "phone projection" for Apple CarPlay and Android Auto on the car's screen. Kia's manuals say a wired connection should use an approved USB cable from the phone's maker, that wireless starts with Bluetooth pairing, and that some functions, such as USB mode, are unavailable while projection is on.
Availability depends on the model, trim and country. Hyundai uses similar wording, but we read only Kia's manual, so check your own car's manual. If phone projection does not work, a cable is the first thing to swap. None of this has anything to do with a video projector.
What should you check first when picking one for a phone?
Choose in this order: phone, room, then picture. Most people start from resolution and end with a dim picture or a phone that will not connect.
- Phone first. iPhone: AirPlay 2 or USB-C cable. Android: Google Cast, Miracast or a cable. Confirm the exact method on the maker page.
- Netflix. Prefer a model with Netflix inside.
- Brightness. Aim at 300 lumens or more for a dark room at 60 to 80 inches.
- Weight and power. 2 to 4 lb for a bag, a battery of 50 Wh or more for an hour or three.
- Sound. A 5 W speaker is a stopgap; see Bluetooth projectors for pairing a speaker.
For a wireless-only shopper, our wireless projector guide goes deeper. For lit rooms and bigger pictures see the projector pillar.
Which mistakes should you avoid?
- Trusting the box. A "1080p" label does not mean 1080p input; check the resolution row.
- Assuming AirPlay plays Netflix. Netflix says it does not.
- Counting lumens as one unit. ISO and ANSI differ; compare the same unit.
- Skipping the cable. A USB-C to HDMI adapter that supports HDMI 2.0 is cheap insurance.
- Forgetting HDCP. Apple says streaming apps may ask for an HDCP connection.
- Expecting a TV. Phone projectors need a dark room.
How the eight were picked
The sources are maker pages, ProjectorCentral reviews and spec sheets, and Apple, Samsung and Netflix help pages, all read on 17 November 2026. We chose eight models to cover three phone routes: cast, cable and built-in app. No projector was tested by us.
We kept two discontinued models (the LG CineBeam Q and the Yaber Pico T1) as reference points without a buy button, because they show routes the newer ones lack. What we could not confirm: whether the Nebula Cast app supports iPhone, AirPlay on the XGIMI and JMGO models, Netflix on the Freestyle, the video function of the PicoFlix USB-C port, and the Samsung AirPlay claim, which ProjectorCentral does not list.
FAQ
Which phone projector should I look at first?
The Nebula Mars 3 Air for Android and Netflix, or the Samsung Freestyle 2nd Gen for an iPhone with AirPlay 2. They are the two models with a documented phone route that are still on sale.
Does a phone projector work with an iPhone?
Yes. Use AirPlay 2 on the Freestyle 2nd Gen, or a cable with an iPhone 15, 16 or 17 (not the 16e or 17e) on a projector that has a DisplayPort USB-C port. An older Lightning iPhone needs Apple's Digital AV Adapter.
Does a phone projector work with Android?
Yes, through Google Cast on the Mars 3 Air, MoGo and PicoFlix, Screen Share on the LG, or Miracast on the Yaber.
Can a phone projector play Netflix?
Yes, through the projector's own app on the Mars 3 Air, PicoFlix, MoGo 3 Pro and, per XGIMI, the MoGo 4. Casting Netflix from a phone is largely gone.
How bright is a phone projector?
From 230 ANSI lumens (Freestyle 2nd Gen) to 450 rated (MoGo and PicoFlix). Below 300 you need a dark room.
What size picture can you get from a phone projector?
About 30 to 100 inches for the Freestyle 2nd Gen, and 60 to 100 inches for the Mars 3 Air and the PicoFlix.
How many hours will a phone projector run on battery?
About 2 hours for the XGIMI MoGo 4 and Capsule 3 Laser, about 4 hours for the PicoFlix, and 2.5 to 3 hours for the Mars 3 Air.
What is the lightest phone projector?
The Samsung Freestyle 2nd Gen at 1.8 lb, then the Nebula Capsule 3 Laser at 2.1 lb.
Can I connect an iPhone with a cable?
Yes, on an iPhone 15, 16 or 17 (not the 16e or 17e) and a projector with a DisplayPort USB-C port or an HDMI adapter.
Does a phone projector have speakers?
Yes, 5 W mono on the Freestyle up to 12 W (2 x 6 W) on the MoGo 4. Use a Bluetooth speaker for a group.
Can I take a phone projector on a plane?
Yes, in carry-on. Lithium batteries under 100 Wh are allowed; the TSA and FAA pages in Sources give the rules above that.
Is a phone projector good for playing games from my phone?
For casual games, yes. ProjectorCentral's figure for the XGIMI MoGo 4 is 20 ms of input lag at 1080p/60, which is good for casting a game from a phone. Brightness is the limit: the MoGo is rated 450 ISO lumens, so play in a dim room.
Sources
- ProjectorCentral: Nebula Mars 3 Air review
- ProjectorCentral: LG CineBeam Q HU710PB review
- ProjectorCentral: XGIMI MoGo 3 Pro
- ProjectorCentral: XGIMI MoGo 4
- ProjectorCentral: JMGO PicoFlix
- ProjectorCentral: Samsung Freestyle 2nd Gen
- ProjectorCentral: Nebula Capsule 3 Laser review
- ProjectorCentral: Yaber Pico T1
- Netflix: cast or mirror from a mobile device
- Samsung: stream your iPhone to The Freestyle with AirPlay 2
- Apple: connect iPhone to a display with a cable
- Kia owner's manual: phone projection
- PhoneArena: Moto Insta-Share Projector
- Engadget: Samsung Galaxy Beam review
- TSA: lithium batteries over 100 watt hours
Keep comparing
Home Theater ProjectorEight home theater projectors compared for 2026 by contrast, black level, HDR, lens, noise and screen size
4K ProjectorNine 4K projectors compared for 2026 by how the 4K is made, brightness, HDR formats and HDMI ports
Outdoor Projectors in 2026The outdoor projectors for backyards, patios and campsites, with real brightness numbers, screen sizes
Cheap Projectors for 2026Cheap projectors compared on lumens, native resolution, noise and lamp life
