Best Inflatable Movie Screens for Backyard Movies (2026)

By the Home Projector Guide team · Updated · How we research

As an Amazon Associate I earn from qualifying purchases.

10 inflatable screens set side by side · updated November 2026

10 models named · 5 tables · 14 questions answered · checked November 2026

Summarize withChatGPTPerplexity

Illustration: inflatable movie screens for backyard movies setup in a home

An inflatable movie screen is a frame of air-filled tubes that holds a white sheet upright while a blower runs. The size on the box is not the size of the picture: a "20 ft" screen is 220 square feet at Open Air Cinema and 113 at Vevor. Our guide sets ten screens side by side, flags what makers leave out, and works out the projector, blower, stakes and wind limit each size asks for.

Quick answer: what to know before you buy

Take the Open Air Cinema Standard 16 ft if you want published numbers: 16 by 9 ft, 25 lb, a 1/2 HP blower and a 20 mph wind rating.

Take the Vevor 24 ft if you want the biggest sheet for the least outlay (161 square feet) and accept no published weight, wind limit or noise figure.

Neither if gusts pass 20 mph at your site. Then choose a frame screen, such as the Elite Screens Yard Master 2, in our outdoor movie screen guide.

  • Read the picture size, not the headline size. Compare screen width by height in feet. Area decides how bright the projector must be.
  • Plan for 15 to 20 lumens per square foot. A 16 by 9 ft sheet (144 square feet) needs about 2,200 to 2,900 lumens in full darkness, according to Open Air Cinema's tutorial.
  • The blower never stops. The screen holds its shape only while air flows, so every setup needs a standard US outlet (Vevor lists 110 V) within cord reach.
  • Wind is the hard limit. Open Air Cinema rates its kits at 20 mph (32 km/h). Vevor publishes no wind figure at all.
  • Noise is mostly unpublished. None of the maker pages we read lists a decibel figure. Run the blower and your speaker together before the first guests arrive.
  • Front projection is brighter. Rear projection suits stages and pools, and it costs picture brightness that no maker quantifies.

Our picks at a glance

  • 1Open Air Cinema Standard 16'families with a yard that has room for a 16 ft wide screen plus its tethers, and anyone who wants a published wind limit and a…Check price
  • 2Open Air Cinema Standard 20'block parties, school lawns and church fields with room for the footprintCheck price
  • 3Open Air Cinema Event Pro 12'pool decks and small events where you want rear projection and the heavier frameCheck price

Which inflatable movie screen should you buy?

Ten screens cover the real choices, from a 12 ft lawn screen to a 20 ft event screen. We read the maker page for each where it loaded, and a retailer listing where it did not, and we say which is which.

ScreenPicture sizeDiagonalAreaBlowerWeightWind ratingProjection
Open Air Cinema Standard 16'16 x 9 ft18.4 ft (220 in)144 sq ft1/2 HP + muffler box25 lb20 mphFront
Open Air Cinema Standard 20'20 x 11 ft23 ft (276 in)220 sq ft1 HP + muffler box45.5 lb20 mphFront and rear
Open Air Cinema Event Pro 12'12 x 7 ft14 ft (166 in)84 sq ft2 blowers + box80 lb20 mphFront and rear
Open Air Cinema Event Pro 16'16 x 9 ft18.4 ft (220 in)144 sq ft2 blowers + box95 lb20 mphFront and rear
Open Air Cinema Event Pro 20'20 x 11 ft23 ft (276 in)220 sq ft2 blowers + box140 lb20 mphFront and rear
Vevor 20 ft13.8 x 8.2 ft16 ft display113 sq ft350 WNot listedNot listedFront and rear
Vevor 24 ft16.4 x 9.84 ft24 ft overall161 sq ft360 WNot listedNot listedFront and rear
Gemmy Airblown 12 ft123 x 77 in (listings vary)Not consistent66 sq ft2 built-in fans20 to 24 lbNot ratedFront
Funboy 20 ftNot published"20 FT" overallUnknownNot publishedNot publishedNot publishedFront and rear
Elite Outdoor Movies Home 20'20 x 11 ft23 ft220 sq ftNot confirmedNot publishedNot publishedFront and rear

How to read it: the three Open Air Cinema lines differ in build and warranty, not in picture size. The Standard 16 ft and Event Pro 16 ft show the same 144 square feet. What you pay extra for in the Pro is a second, high-wind blower, a 95 lb frame and a 3-year warranty instead of 1 year. For budget plans, see our projector and screen combo page.

Open Air Cinema Standard 16': the maker-backed backyard pick

Open Air Cinema's Standard 16 ft is a 16 by 9 ft sheet (18.4 ft diagonal) on rip-stop airbag fabric with a matte-white, wrinkle-free surface. The screen weighs 25 lb. The 1/2 HP blower comes with a sound-dampening muffler box. Eight high-tension tethers with rust-proof steel stakes, a mallet and cinch straps are in the box, along with a ground cover and a repair kit.

The page lists 250 people on grass, 400 in chairs and 1,000 standing, and a 1-year warranty. It states a 20 mph wind rating without saying whether that means a steady wind or a gust. It publishes no inflated depth, no inflation time and no blower noise.

Right for: families with a yard that has room for a 16 ft wide screen plus its tethers, and anyone who wants a published wind limit and a printed setup guide.

Not for: rear projection (the included screen is front only), or windy hilltops.

Check price

Open Air Cinema Standard 20': the biggest home-series sheet

The Standard 20 ft is 20 by 11 ft, a 23 ft (276 in) diagonal and 220 square feet of surface. It weighs 45.5 lb. The blower is 1 HP with a muffler box. A removable blackout curtain on the back lets you use the screen for front or rear projection.

Eight tethers with stakes are included, and the wind rating is 20 mph. Open Air Cinema lists 500 people on grass, 1,000 in chairs and 3,000 standing. Warranty is 1 year. At this size the screen needs a projector near 3,300 lumens for a dark-site picture, so budget the projector first.

Right for: block parties, school lawns and church fields with room for the footprint.

Not for: a typical suburban yard, or a 1,000-lumen projector.

Check price

Open Air Cinema Event Pro 12': the small stage screen

The Event Pro 12 ft is 12 by 7 ft (14 ft diagonal, 166 in, 84 square feet). Its frame measures 16 by 12 by 7 ft. It weighs 80 lb and carries two air blowers, one standard and one high-wind, with a sound-dampening box.

Eight tethers with 20 in steel stakes are included. The wind rating is 20 mph, the warranty is 3 years, and the page lists 100 people on grass. Front and rear projection both work. The page gives no inflation time.

Right for: pool decks and small events where you want rear projection and the heavier frame.

Not for: a one-person carry; 80 lb is a lot for a lawn screen of this size.

Check price

Open Air Cinema Event Pro 16': the same picture, built heavier

The Event Pro 16 ft shows the same 16 by 9 ft sheet as the Standard 16 ft: 144 square feet, an 18.4 ft diagonal. The difference is underneath. Its frame measures 20 by 15 by 7.75 ft, the screen weighs 95 lb, and two blowers feed it. It has a zip-off washable surface and a 3-year warranty.

Eight tethers with 20 in rust-proof steel stakes, a mallet and a carry bag are included, plus a ground cover and a repair kit. Wind rating is 20 mph. Two captions on the page mention the 20 ft kit, so confirm the stake count with the maker.

Right for: rental use and repeat setups, front or rear projection.

Not for: buyers who only run a few movie nights a year; the Standard does the same job for less weight.

Check price

Open Air Cinema Event Pro 20': the event screen

The Event Pro 20 ft has the same 20 by 11 ft picture as the Standard 20 ft, with a 27 by 21.5 by 11 ft frame, a 140 lb weight and two blowers. It carries a 3-year warranty and a zip-off washable surface, and it works front or rear. The audience figures are 500 on grass, 1,000 in chairs and 3,000 standing.

The wind rating is still 20 mph, so the heavier frame buys durability and a spare blower, not extra wind tolerance. Inflation time is not listed.

Right for: festivals, parks and fundraisers that set up a screen many times a year.

Not for: home use; it needs room for a 27 ft footprint and a way to move 140 lb.

Check price

Vevor 20 ft: the budget screen with a smaller sheet

Vevor's 20 ft screen is a marketing size. The display is 13.8 by 8.2 ft (4.2 by 2.5 m), a 16 ft diagonal. The overall frame measures 16.8 by 6.56 by 11.2 ft. The blower is 350 W at 110 V and 60 Hz, although one answer on the listing says 370 W. The fabric is 600D Oxford, water washable, and the page claims full inflation in one minute.

Package contents are the screen, the blower, a rope kit, 6 stakes, patch cloth, a sewing kit and a bag. The page gives no weight, no wind limit and no dB figure, and one owner reports they cannot use it in a breeze.

Right for: small yards, kids' movie nights and a first inflatable screen.

Not for: open lawns with regular wind, or anyone who needs a maker rating to point to.

Check price

Vevor 24 ft: the most picture for the least outlay

Vevor's 24 ft listing shows a 16.4 by 9.84 ft screen (161 square feet) inside a 19.69 by 13.12 ft frame. The blower is listed at 360 W in the specs and 350 W in the highlights, so treat the number as roughly 350 W. The fabric is 600D Oxford, inflation is 1 to 2 minutes, and front and rear projection both work.

Stakes and ropes are included without a count, and the page gives a triangular base as its wind answer rather than a number. Weight and noise are missing.

Right for: the largest sheet for a modest budget, with a projector of 2,400 lumens or more.

Not for: buyers who want a stated wind rating or a weight before ordering.

Check price

Gemmy Airblown 12 ft: the lawn screen for kids

The Gemmy screen is the smallest option here. Lowe's and Walmart list it at 12 ft wide and 9.5 ft high inflated, with a screen of 123 by 77 in, two built-in fans and a weight of 24 lb. Other listings give 123 by 70 in and 20 lb. A listed 149 in diagonal does not match the 123 by 77 in sheet; our arithmetic gives 145 in.

The manual says the screen will not stay up unless it is plugged in and the fan is running. Tethers and stakes are included, and the listing recommends an HD projector, which is not included.

Right for: a 66 square foot picture on a patio or lawn, with a projector near 1,000 lumens.

Not for: wind (no rating exists) or a crowd.

Check price

Funboy 20 ft: little published, so check before you buy

Funboy sells a 20 ft inflatable screen with a removable projection sheet for front and rear use, a constant-air blower and a setup time under five minutes. The product pages we could read give no screen dimensions and no blower wattage, so we cannot size the picture. The 20 ft figure is an overall size, as at Vevor.

Right for: buyers who already know the sheet size from the seller's chat or listing.

Not for: anyone who needs to plan projector brightness from published numbers.

Check price

Elite Outdoor Movies Home 20': the 220 square foot home screen

Retailer listings for the Elite Outdoor Movies Home 20' give a removable 20 by 11 ft surface, a 23 ft diagonal and a 25 ft 4 in by 11 ft 9 in by 4 ft frame. Four 18 in stakes are listed, with room for about 375 people on blankets or 450 on chairs. We could not confirm the blower or gain from a maker page, so check both.

Right for: buyers who want the 220 square foot picture from a projector dealer's support.

Not for: anyone who needs a published wind rating; none appeared in the listings.

Check price

What is an inflatable movie screen, and how does it work?

What is an inflatable movie screen?

An inflatable movie screen is a tube-frame screen filled with air and sold with a blower, a projection sheet and ground tethers. The sheets in this guide run from about 10 to 20 ft wide, and the screen weighs 20 to 140 lb, depending on the build.

Open Air Cinema sells three tiers: Standard home kits, Event Pro kits for events and Elite screens up to 40 ft.

How do inflatable movie screens work?

The blower pushes air into the frame through an open port. The frame is not airtight, so air leaks out as fast as the fan adds it. That is why Open Air Cinema says its blower runs continuously and why Gemmy's manual says the screen will not stay up unplugged.

The projection sheet clips or zips to the front of the frame. A black backdrop on the back blocks light. Remove the backdrop and the screen works for rear projection too. A "no blower" inflatable screen does not exist in this category; a self-supporting screen without air is a frame screen. The same principle covers how an inflatable projection screen works: air holds the frame, the sheet takes the light.

Other outdoor screens, which are a matte-white sheet on a frame, a cable or a wall, work on the same idea without air, and the outdoor movie screen guide explains how they work, how to hang one and which to pick. Our portable projector screen page covers the tripod types, and making your own from fabric is in our DIY outdoor movie screen guide.

What size inflatable movie screen do you need?

Choose the width you can light and see. A 16:9 screen 12 ft wide is 84 square feet; 16 ft wide is 144; 20 ft wide is 220. Doubling the width quadruples the area, so a screen twice as wide needs a projector about four times as bright, per Open Air Cinema.

Screen widthPictureAreaLumens at 15 per sq ftLumens at 20 per sq ftExample screen
10.25 ft (123 in)10.25 x 6.4 ft66 sq ftAbout 990About 1,320Gemmy 12 ft
12 ft12 x 7 ft84 sq ftAbout 1,260About 1,680Event Pro 12'
13.8 ft13.8 x 8.2 ft113 sq ftAbout 1,700About 2,260Vevor 20 ft
16 ft16 x 9 ft144 sq ftAbout 2,160About 2,880Standard 16'
16.4 ft16.4 x 9.84 ft161 sq ftAbout 2,420About 3,230Vevor 24 ft
20 ft20 x 11 ft220 sq ftAbout 3,300About 4,400Standard 20'

The two lumens columns use Open Air Cinema's rule of roughly 15 lumens per square foot for a solid dark-site picture and about 20 for headroom outdoors, on a 1.0-gain screen. We multiplied them by the areas above. The same tutorial warns that rated lumens are not screen lumens, so buy with margin. For more on the math, see our guide to how many lumens for a projector.

How tall does it stand? Gemmy lists 9.5 ft inflated and Vevor's 20 ft listing 11.2 ft. Open Air Cinema gives three frame dimensions without saying which is height, so ask before you pick a spot under wires or branches.

Which projector goes with which inflatable screen?

Pair the screen's area with the projector's measured brightness, not its box number. Our outdoor projector guide lists the numbers we trust: the Nebula Mars 3 measured 959 ANSI lumens in Bright mode, the JMGO N1S Ultra is listed at 3,000 ANSI lumens, and the Nebula Mars 3 Air is rated 400.

Screen areaDark-site needProjector that fitsReality check
66 sq ft (Gemmy)About 990 lmNebula Mars 3 (959 ANSI measured)Just short of the 15 lm rule; fine on a very dark night
84 to 113 sq ft1,260 to 1,700 lmJMGO N1S Ultra (3,000 ANSI listed)Plenty of room, even with a patio lamp
144 to 161 sq ft2,160 to 2,420 lmJMGO N1S Ultra (3,000 ANSI listed)Close to the 20 lm rule; listed, not measured
220 sq ft3,300 lm or moreA brighter projector than any in this guideThe N1S Ultra's 3,000 listed lumens fall short

The Nebula Mars 3 Air (400 ANSI) matches no screen above and suits only a smaller sheet. Read the JMGO projector page for the N1S Ultra, and our laser projector page for brighter units.

Throw distance is the other half of the pairing. It equals throw ratio times image width, and Open Air Cinema says most projectors sit about twice the image width back.

Image widthAt 1.2:1At 1.5:1At 2.0:1
12 ft14.4 ft18 ft24 ft
16 ft19.2 ft24 ft32 ft
20 ft24 ft30 ft40 ft

Use the projector throw distance calculator for your exact model and our guide on how far a projector should be from the screen. Short-throw projectors are less forgiving here, because inflatable screens sway, and a low ratio magnifies the movement (Open Air Cinema). For the ratios themselves, see projector throw ratio explained.

Front or rear projection, and what is the surface made of?

Front projection puts the projector in the audience's half of the yard and gives the brighter picture. Rear projection hides the projector behind the screen, so people can sit on both sides. Open Air Cinema's Standard 16 ft ships as front only. Its Standard 20 ft and Pro kits cover both. Vevor lists both sizes as front and rear.

None of the maker pages we read publishes a gain figure or a brightness loss for rear projection. Open Air Cinema's Standard kits use rip-stop airbag fabric with a matte-white surface. Vevor's are 600D Oxford. Matte white sheets spread light widely, which suits seating in a wide arc, and a screen that sways or wrinkles blurs the picture before the gain matters.

A black backing behind the sheet stops light from the back and helps contrast in dark scenes. That matters most when a streetlight or a neighbor's porch lamp sits behind the screen. In daylight, no inflatable helps much; see our projector for daylight page.

Are inflatable movie screens loud?

Yes, a little, and the maker pages say little about how much. Inflatable screen blowers run from 350 to 360 W (Vevor) up to 1 HP (Open Air Cinema Standard 20 ft). No maker page we read lists a decibel figure. Own the Yard calls the Open Air Cinema 16 ft blower whisper-quiet and the LifeSmart and Tusy blowers loud, which are opinions, not measurements.

Open Air Cinema says that outdoors you will usually not notice the fan, and that its sound-dampening boxes insulate the motor without overheating it. It suggests a box for indoor use and tight spaces. The box comes in three sizes (small, medium and large), the first two for Home and Pro screens.

Test before guests arrive. Run the blower and your speaker at the real distance, then put the blower behind the screen, away from the seats. Our outdoor projector guide explains why a small powered speaker beats a projector's own sound.

Open Air Cinema lists a 1/4 HP blower (250 CFM, 8 lb) for its Standard 9 and 12 ft screens, 1/2 HP for the Standard 16 ft and 1 HP for the Standard 20 ft, while Vevor lists 350 to 360 W for its 20 and 24 ft screens. One horsepower is about 746 W of motor output, so a 1 HP blower draws more than a 350 W Vevor unit. Larger screens may need their own 20 amp circuit, according to a buyer's guide at Own the Yard, so do not share an outlet with a heater.

How much wind can an inflatable movie screen take?

Open Air Cinema rates its kits at 20 mph (32 km/h), and one dealer lists 35 mph for the Pro line, which the maker page does not confirm. Vevor and Gemmy publish no number. Gemmy's frame is described as bottom-heavy, and Vevor relies on a triangular base and stakes.

Treat 20 mph as a hard stop. A review at Own the Yard says wind "will easily knock them over", and that guests usually head indoors when it picks up. That is a good test: if a patio umbrella tips, deflate the screen.

  • Stake all the tethers. Open Air Cinema ships 8 tethers on every home and pro kit. Use them all.
  • Choose metal stakes over plastic, as Own the Yard advises, and drive them at an angle away from the screen.
  • Face the open side away from the wind where you can.
  • Unplug and lower the screen at the first gust that moves the frame. Inflatables deflate in seconds.
  • Keep people behind the line the first time you inflate the screen, so you can watch it settle.

A screen that sways also moves the picture. For gusty yards, a heavier Event Pro frame (80 to 140 lb) or a frame screen is the steadier option.

The anchoring kit differs more than the picture size does, so compare what is in the box before you compare screens.

ScreenTethers and stakesWarrantyAudience listed
Open Air Cinema Standard 16'8 tethers, steel stakes, mallet, cinch straps1 year250 grass, 400 chairs
Open Air Cinema Standard 20'8 tethers, steel stakes, mallet, cinch straps1 year500 grass, 1,000 chairs
Open Air Cinema Event Pro 12'8 tethers, 20 in steel stakes3 years100 grass, 175 chairs
Open Air Cinema Event Pro 16'8 tethers, 20 in steel stakes, mallet3 years250 grass, 400 chairs
Open Air Cinema Event Pro 20'8 tethers, 20 in steel stakes3 years500 grass, 1,000 chairs
Vevor 20 ft6 stakes and a rope kitNot listedNot listed
Elite Outdoor Movies Home 20' (retailer)4 stakes of 18 inNot listed375 blankets, 450 chairs

How do you set up an inflatable movie screen?

Open Air Cinema lists a one-person setup crew for its kits. Vevor claims inflation in 1 to 2 minutes, Funboy puts setup under 5 minutes, and a dealer summary quotes under 120 seconds for the Open Air Cinema Pro 20 ft, which its own page does not state.

  1. Pick flat, clear ground with room for the whole frame footprint and a walking lane, away from wires and branches.
  2. Lay the ground cover, spread the screen with the back to the wind and connect the blower to the port.
  3. Stake the tethers before you switch the blower on, using the mallet and cinch straps.
  4. Inflate and attach the sheet, then pull the tethers snug.
  5. Place the projector at the throw distance from the table above, on a stable table or tripod, and aim it at the middle of the sheet.
  6. Plug in the audio and run the film before dusk, so you can fix keystone and focus in light.

For the projector side, follow our how to use and set up a projector guide. To stream from a phone, see how to connect a phone to a projector.

How do you use an inflatable projector screen on a pool?

Use rear projection if you want the screen at the water's edge with the projector on the deck behind it. Keep the blower and every cord away from the water, and use a ground-fault outlet. The Event Pro 12 ft is the small pool-deck screen, and its two-blower build helps if one fails.

How do you fold, clean and store an inflatable movie screen?

How do you fold an inflatable movie screen?

Let the air out, then roll or fold along the tubes into the carry bag. Open Air Cinema ships a bag for the screen and one for the projection sheet, plus a repair kit. Weights run from 25 lb (Standard 16 ft) to 140 lb (Event Pro 20 ft), so a folded 16 ft screen is a one-person lift and a Pro 20 ft is not.

Dry the screen fully before bagging it. A damp sheet in a bag grows mildew in days.

How do you clean an inflatable movie screen?

Wipe the sheet with a damp cloth and mild soap, then air-dry it. Open Air Cinema describes the Event Pro's zip-off surface as washable and the Standard's as wrinkle-free. Vevor calls its 600D Oxford fabric water washable. Skip abrasive cleaners, which dull a matte-white coating.

Clean the blower intake of grass and dust. Store the whole kit in a dry shed, never outdoors overnight, since dew damages electronics (Open Air Cinema's tutorial applies that rule to projectors).

How much does an inflatable movie screen cost, and what about renting?

How much does an inflatable movie screen cost?

We print no prices, because they move and we have no reliable US source. The range is wide. Open Air Cinema's own list runs more than ten times higher from its smallest Standard kit to its Elite 40 ft kit. Vevor's nominal 20 ft screen carries about half the picture area of Open Air Cinema's 20 ft, with fewer published specs.

Check the price on the seller's page before you decide, and compare the sheet in square feet, not the headline size.

How much does it cost to rent an inflatable movie screen?

Rental rates depend on the city, the size and whether a crew sets it up. We found no maker rate card, so we give no figure. Ask for the picture size in feet, not the "20 ft" label, and whether the projector, speakers and a generator come with it. A rental for one night costs less than owning when you will use a screen once.

Where can you buy an inflatable movie screen?

Open Air Cinema sells direct and through projector dealers. Vevor sells on its own site and through marketplaces. Gemmy's screen appears at Lowe's and Walmart. Elite Outdoor Movies screens are sold by projector-screen dealers. Funboy sells on its own site.

We left two names out. Sewinfla screens appear mainly on marketplaces and we could not read a maker page with specs. We also found no inflatable screen from a brand called Pogo. A figure we could not verify stays out of this guide. The Elite Screens Yard Master 2 is a folding-frame screen, not an inflatable, and ships with 4 stakes and 2 ropes.

Are inflatable movie screens any good compared with frame screens?

Inflatables win on size per pound. A 16 by 9 ft sheet weighs 25 lb on an Open Air Cinema Standard frame, and a 100 inch 4:3 Yard Master 2 weighs 20.7 lb for a 60 by 80 in view. They lose on wind, on the blower noise and on needing power.

Pick an inflatable for crowds and big pictures, and a frame screen for gusty sites or a quick, simple setup. For a plain wall, see projector on wall. If you want to choose the projector first, start with our projector guide, and for trips, the camping projector page. To build your own sheet, read how to make a DIY outdoor movie screen.

FAQ

What is the best inflatable movie screen for a backyard?

The Open Air Cinema Standard 16 ft: a 16 by 9 ft sheet (144 square feet), 25 lb, a 1/2 HP blower and a 20 mph rating. Its detail is published, and it fits a 2,200 to 2,900 lumen projector.

What is the best inflatable outdoor movie screen for big groups?

The Open Air Cinema Event Pro 20 ft, with a 20 by 11 ft sheet (220 square feet), two blowers and a 3-year warranty. It is a 140 lb screen, so it suits venues, not lawns.

What is the best inflatable projector screen for a small budget?

The Vevor 24 ft gives 161 square feet of picture, a 360 W blower and front or rear projection. It publishes no weight or wind rating. The Vevor 20 ft shrinks to 113 square feet.

Are inflatable projector screens any good?

Yes, for size and for quick setup. They are less good in wind above 20 mph, need a plugged-in blower and add fan noise. Maker ratings exist only for the Open Air Cinema kits we checked.

How many lumens does an inflatable screen need?

About 15 lumens per square foot for a dark-site picture and 20 for margin. That is roughly 2,160 to 2,880 lumens for a 16 by 9 ft sheet, and 3,300 to 4,400 for a 20 by 11 ft one.

How big should an inflatable screen be?

Pick the width from your yard and projector. 12 ft wide (84 square feet) suits a 1,300 to 1,700 lumen projector. 16 ft wide (144 square feet) needs about twice that. The Event Pro 16 ft frame measures 20 ft wide, so plan for more room than the sheet.

Can an inflatable movie screen stay inflated without a blower?

No. The frame leaks air by design and the blower runs the whole time. Gemmy's manual says the screen will not stay up unless it is plugged in and the fan is running.

How loud is an inflatable screen blower?

No maker page we read gives a decibel number. Vevor says "low noise" and Open Air Cinema says you usually will not notice it outdoors. Test it with your speaker before guests arrive.

How much power does an inflatable screen blower use?

Vevor lists 350 to 360 W at 110 V. Open Air Cinema uses 1/2 HP on the Standard 16 ft and 1 HP on the Standard 20 ft. Those are motor ratings, so plan for a dedicated outlet.

Can you use an inflatable screen in the wind?

Not above about 20 mph (32 km/h), which is Open Air Cinema's rating. Stake every tether with metal stakes, and deflate the screen at the first gust that moves the frame.

Can you use an inflatable movie screen in the rain?

Treat it as fair-weather gear. We found no maker rain rating for the screens in this guide. Keep the blower, the cords and the projector dry, and bring everything in at the first rain.

Can you use an inflatable movie screen in the daytime?

You can, but the picture washes out. Plan for shade, a very bright projector and a dark backing. See our projector for daylight guide for the numbers.

How long does an inflatable screen take to inflate?

Vevor claims 1 to 2 minutes and Funboy says setup takes under 5 minutes. Open Air Cinema's pages for its home kits give no time, so allow extra time for staking the tethers.

What projector goes with an inflatable screen?

Match brightness to area. The Nebula Mars 3 (959 ANSI measured) fits a 66 square foot sheet. The JMGO N1S Ultra (3,000 ANSI listed) fits up to about 161 square feet. See our outdoor projector guide.

Sources

Every number comes from a maker page or a named retailer, shown side by side where they disagree. We print no prices.