For a living room wall, buy a laser TV kit: the Hisense L9H, 3,000 lumens with a 100 or 120 inch ALR screen included. We checked eight kits, two of them discontinued and kept only as reference, and tested none.
Get a laser TV kit if the picture replaces a TV and the projector sits on a cabinet.
Pair a standard projector and a matte screen if the room is dark.
Neither if you carry it outside: take the XGIMI MoGo 4 Laser kit, with its 70 inch screen.
Quick answer: what to know before you buy
- A combo is only as good as the match. Size the screen first, then check distance, then lumens, then surface. In a dark room, pair 1,100 to 2,700 real lumens with an 80 to 120 inch matte screen. A great projector on the wrong screen loses more than it gains.
- Ultra short throw projectors need a screen made for them. At 0.16:1 to 0.25:1 the beam climbs steeply from below, and an ALR (ambient light rejecting) surface keeps the picture visible with lights on.
- Brightness divides by area. A 150 inch picture has 66.8 square feet, 2.25 times the 29.7 square feet of a 100 inch one, so the light per square foot falls by more than half.
- Ready-made kits are rare and change fast. Hisense and a few retailers sell screens in the box, and AWOL Vision did until ProjectorCentral listed its LTV-3500 Pro as discontinued in September 2026. Epson and XGIMI mostly sell the screen next to the projector.
- We print no prices. We have no reliable US price source, so every button reads "Check price". Price the projector and screen together before you decide.
Our picks at a glance
- 1Hisense L9H and L5Ha wall where a 100 or 120 inch TV will never fit, with a cabinet 1 to 2 feet from the wallCheck price
- 2JMGO O2S Ultra with a 100 inch ALR screena JMGO buyer who wants the brightest rated number in this table, with the shortest distance to the wallCheck price
- 3XGIMI MoGo 4 Laser Outdoor Collectiona deck, a campsite or a gazebo with a 60 to 80 inch screenCheck price
Which projector and screen combos can you actually buy?
Four kinds of combo exist. A laser TV kit puts an ultra short throw projector and an ALR screen in one order. An outdoor kit adds a small screen, a stand and a battery to a portable projector. A retailer bundle pairs two separate products under one listing. A matched pair is two products you choose yourself.
The table covers the kits whose contents we could confirm from a maker page, a retailer listing or a spec database. "Rated" means the maker's number, not a measurement.
| Combo | What is in the order | Rated brightness | Throw | Screen | Status |
|---|---|---|---|---|---|
| Hisense L9H Laser TV | Projector, ALR screen | 3,000 lumens | 0.25:1 (Hisense UK page) | 100 or 120 in, ALR | Sold with screen |
| Hisense L5H Laser TV | Projector, ALR screen | 2,700 lumens | Not listed | 100 or 120 in, ALR | Sold with screen |
| AWOL Vision LTV-3500 Pro kit | Projector, fixed-frame ALR screen | 3,000 ISO lumens | 0.25:1 | 100 in (ALR-D100) | Projector discontinued Sept 2026, reference only |
| JMGO O2S Ultra bundle | Projector, ALR screen | 3,600 ISO lumens | 0.16:1 | 100 in, ALR | Retailer bundle |
| XGIMI Aura 2 bundle | Projector, ALR screen | 2,300 ISO lumens | 0.18:1 | 100 in, ALR | Canadian retailers |
| Epson EpiqVision Ultra LS800 | Projector; screens sold separately | 4,000 lumens | Not listed | SilverFlex Ultra 100 or 120 in | Discontinued, reference only |
| XGIMI MoGo 4 Laser Outdoor Collection | Projector, PowerBase stand, screen | 550 ISO lumens | 1.20:1 | 70 in, portable | B&H and retailer listings |
| XGIMI Aura 3 Max bundles | Projector plus 100 to 150 in screens | 5,700 ISO lumens | 0.163:1 | Ascend, Fresnel or Black Grid ALR | Pre-order, ships from December 2026 |
Order by room, not by rank. The first rows suit a living room wall, except the two discontinued ones. The MoGo kit is the only one you can carry. The Aura 3 Max is not on sale as a shipped product yet, and we have no measurement for it.
Why does a kit matter at all? Because the screen is the part buyers get wrong. A standard projector tolerates almost any flat surface, but an ultra short throw projector does not. When the maker puts both in one order, the beam angle and the surface were designed together, and you skip the question of whether a screen you found separately suits a 0.16:1 lens. The cost of that comfort is flexibility: you cannot swap the projector later without checking the screen again.
Hisense L9H and L5H: the screen is in the box
Hisense sells its 100 inch and 120 inch Laser TVs as one package. Notebookcheck reported the US launch in October 2023: the L9H at 3,000 lumens and the L5H at 2,700 lumens, both with a 100 or 120 inch ALR screen. The L5H is 4K, and the L9H uses a TriChroma laser light source with up to 107 percent of the BT.2020 color space.
The screen type changes by region. Hisense Canada describes the L5H screen as Fresnel ALR, 89.1 by 50.9 by 1.1 inches, with a 25,000 hour light source. Hisense UK calls the L5H screen "flexible". Check which one ships to you, because a Fresnel screen narrows the seating area.
Hisense's own FAQ gives two practical facts. The screen ships flat-packed in a cardboard box, and assembly takes two people about 1 to 2 hours. The projector itself sits 8 inches from the wall by Hisense's measure, but we could not confirm the reference point, so measure to the lens.
Best for: a wall where a 100 or 120 inch TV will never fit, with a cabinet 1 to 2 feet from the wall.
Not for: a rented flat where you cannot assemble a frame, or a room with a wall wider than 9 feet that already holds furniture. See the Hisense laser TV page.
AWOL Vision LTV-3500 Pro with an ALR screen: a discontinued reference
ProjectorCentral lists the LTV-3500 Pro as discontinued in September 2026, so we do not recommend it and give no buy button. It still shows how a kit is put together. AWOL Vision listed the LTV-3500 Pro with several screens. B&H carries one kit with the ALR-D100, a 100 inch fixed-frame daylight ALR screen, and another with the ALR-210C motorized floor screen. AWOL's own store lists a 100 to 120 inch Daylight ALR bundle and a wall-mount Cinematic ALR bundle up to 132 inches.
The projector itself is a 4K RGB laser model. ProjectorCentral lists 3,000 ISO lumens, 2,200:1 contrast, a 0.25:1 throw ratio and a 79.86 to 150.35 inch image from 1.5 to 2.7 feet. Some retailers quote 3,500 ANSI lumens for the same model, so use the ISO figure when you compare it with other pairs.
We found no independent measurement of the bundled screens. The gain and the ambient light rejection of the ALR-D100 are not in the listings we read, so we do not state them.
Useful as a comparison: it shows what a 100 inch ALR kit with a 0.25:1 lens looks like on paper. Not a pick, because the projector is discontinued. For a similar living room wall, look at the Hisense L9H kit above, or the Aura 2 once you confirm the screen is in your listing. See also our short throw projector guide.
JMGO O2S Ultra with a 100 inch ALR screen
The JMGO O2S Ultra is a 4K triple laser projector rated at 3,600 ISO lumens, with a 0.16:1 throw ratio and an 80 to 150 inch image. ProjectorScreen.com sells it, and one retailer bundle pairs it with a 100 inch ALR screen that the seller says blocks 95 percent of room light. That is a seller claim, and we did not verify it.
At 0.16:1 the lens sits about 14 inches from a 100 inch screen by our calculation (0.16 times the 87.2 inch picture width). JMGO's launch material quotes a smaller figure, so measure from the screen to the lens opening and leave a margin of an inch or two.
Best for: a JMGO buyer who wants the brightest rated number in this table, with the shortest distance to the wall.
Not for: a wall that is not flat, a backyard, or a very sunny room. Read the JMGO lineup page before you choose.
XGIMI Aura 2 and Aura 3 Max: screens next to the projector
ProjectorCentral lists the XGIMI Aura 2 at 2,300 ISO lumens, 0.18:1, 4K, a 20,000 hour laser, three HDMI ports, four 15 W speakers and an 89.45 to 150.13 inch image from 1.2 to 1.9 feet. Best Buy Canada, MediaMarkt in the Netherlands and Richer Sounds in the UK list it with a 100 inch ALR screen. We did not confirm the same bundle in the US, so check before you plan around it.
The Aura 3 Max is newer. XGIMI's Kickstarter page lists 5,700 ISO lumens and 0.163:1, with bundles of 100 or 120 inch Ascend UST screens, a 120 inch Fresnel ALR screen, a 120 inch Black Grid ALR screen and a 140 or 150 inch Fresnel ALR screen. Projectors ship in December 2026, fixed ALR screens in January 2027 and floor-rising screens in February 2027. Wait for measurements before you pre-order. Our XGIMI page tracks the line.
Best for: a bright 4K living room setup in the Aura 2, once you confirm the screen is in your listing.
Not for: anyone who needs a kit in the box today in the US.
Epson EpiqVision Ultra LS800: a pair, not a box
Epson lists the LS800 at 4,000 lumens of color and white brightness, with three HDMI ports, a 2.1 channel Yamaha speaker system and images up to 150 inches. Its SilverFlex Ultra ALR screens come in 100 and 120 inches and are sold separately. Epson says they absorb up to 90 percent of ambient light, which is a maker claim.
Epson's product page marks the LS800 as discontinued and names the Lifestudio Grand Plus as its replacement. That is a good example of why a kit can disappear. The Epson projectors page covers current models. We do not link a buy button for a discontinued product.
XGIMI MoGo 4 Laser Outdoor Collection: the only one you carry
B&H lists the MoGo 4 Laser projector, the PowerBase stand and a portable screen as one kit. Best Buy Canada lists the screen at 70 inches. ProjectorCentral lists 550 ISO lumens, 1080p, a 1.20:1 throw ratio, a 40.04 to 200.10 inch image, 3.5 to 17.4 feet of throw, 2.9 pounds and a built-in battery of about 2 hours.
Retailers say the PowerBase raises the battery time to about 5 hours for a movie. We found no measurement, so treat it as a maker figure. On a 70 inch screen the projector spreads 550 lumens over 14.5 square feet, which gives about 37.8 foot-lamberts on a plain white screen. That is bright enough for a dusk start with no lamp in view.
Best for: a deck, a campsite or a gazebo with a 60 to 80 inch screen.
Not for: a 120 inch picture or a daytime start. Our best outdoor projector guide covers brighter models, and the camping projector page covers smaller ones.
A last category is the big-box outdoor kit. Fugoo sells a projector, soundbar, tripod and 120 inch foldable screen at Best Buy and Sam's Club. We could not verify its lumens or throw ratio, so we do not rate it.
Notice what is missing from the table: a dedicated kit for a standard throw projector. Makers rarely bundle a screen with a 1.2:1 projector, because any matte screen works and buyers choose their own size. So for a bedroom or a dark basement, you will build the pair yourself, and the sections below show how.
What is the best projector and screen combo?
For one wall, one room and one projector, the answer is the pair whose numbers agree. Pick the screen size, find the distance it needs, then check that the lumens, divided by the area, reach the light level for your room.
Our order of choices follows the room. A shared living room with a TV-style wall favors an ultra short throw kit. A bedroom or a dark basement favors a standard projector, because it needs no flat cabinet and a plain screen suffices. A patio favors a portable kit.
- Living room, daylight, TV replacement: Hisense L9H with its screen in the box, or the Hisense L9Q or PX4 Pro paired with an ALR screen.
- Dark bedroom, 80 to 100 inches: JMGO N1S 4K on a matte white or gray screen.
- Living room with windows, standard throw: JMGO N1S Ultimate at 100 to 120 inches.
- Backyard or deck: Nebula Mars 3 or the XGIMI MoGo 4 Laser kit.
- Home theater with a ceiling mount: Valerion VisionMaster Max for its lens shift.
For a deeper pick by room, see the best projector pillar page, the home theater projector guide and the bedroom projector guide. If the projector must replace a TV, projector vs TV compares the two.
How does a projector and screen work together?
A projector throws light, and a screen sends part of it back toward your eyes. A white wall does that too, but unevenly. A screen adds a flat surface, a controlled reflectance and, in the ALR types, a way to reject light that comes from the wrong direction.
Two numbers describe the screen. Gain measures how bright the center looks against a white reference rated 1.0, according to Elite Screens. The half-gain angle is where brightness falls by 50 percent off-axis. A higher gain concentrates light and narrows the seating area.
The surface must also match the throw. A standard projector sends light along a nearly straight line, and any matte white or gray screen reflects it back. An ultra short throw projector sends it up from below at a steep angle, and the screen has to be built for that angle.
| Projector class | Throw ratio | Distance at 100 in | Screen that fits | Why |
|---|---|---|---|---|
| Standard throw (JMGO N1S family, MoGo 4 Laser) | 1.20:1 | 8.7 ft | Matte white or gray | Beam arrives nearly straight |
| Zoom lens (Valerion VisionMaster Max) | 0.9 to 1.5:1 | 6.5 to 10.9 ft | Matte white or gray | You choose the distance with the zoom |
| Ultra short throw (JMGO O2S Ultra, Aura 2, Hisense, AWOL) | 0.16 to 0.25:1 | 1.2 to 1.8 ft | ALR screen made for UST, flat | Beam climbs steeply from a cabinet |
Distances are our calculation: throw ratio times the 87.2 inch width of a 100 inch 16:9 picture, divided by 12.
Lenticular or Fresnel: which ALR screen does an ultra short throw kit use?
Both reject ambient light, and they do it differently. ProjectorScreen.com describes a lenticular screen as parallel grooves with a dark top and a white angled bottom. A Fresnel screen is a set of concentric rings flattened into one plane.
| Feature | Lenticular (black grid) | Fresnel |
|---|---|---|
| Gain | Around 0.4 to 0.6 | 1.0 at the best viewing angle |
| Viewing angle | Near 180 degrees | Much narrower |
| Light from above | Rejected well | Rejected well |
| Light from the sides | Weaker | Stronger |
| Form | Fixed frame or retractable ceiling screen | Pre-assembled fixed frame only |
| Weak point | Scratches cannot be repaired | Ghost image on the ceiling, off-axis dimming |
ProjectorScreen.com recommends lenticular "in almost every situation" for a living room, because of the wide angle. Other makers quote different gains for Fresnel screens, between 1.0 and 1.6, so the number depends on the product. Use the table as a rule of thumb and read the datasheet. Our pages on what an ALR screen is and UST projector screens go further.
How do you choose a projector and screen that match?
Five steps replace a guess. Do them in order, because each one narrows the next.
Step 1: How large a projector screen do you need?
Measure the wall first. A 16:9 picture is 87.2 percent of its diagonal wide, so a 100 inch picture is 87.2 inches wide and just over 7.3 feet of wall. Add the frame, which can add two inches: the Hisense L5H screen measures 89.1 by 50.9 inches for a 100 inch picture.
| Diagonal | Width | Height | Area | Light per square foot vs 100 in |
|---|---|---|---|---|
| 60 in | 52.3 in | 29.4 in | 10.7 sq ft | 2.8 times |
| 80 in | 69.7 in | 39.2 in | 19.0 sq ft | 1.6 times |
| 100 in | 87.2 in | 49.0 in | 29.7 sq ft | 1.0 |
| 120 in | 104.6 in | 58.8 in | 42.7 sq ft | 0.7 |
| 150 in | 130.7 in | 73.5 in | 66.8 sq ft | 0.4 |
Pick 80 to 100 inches for a bedroom, 100 to 120 for a living room, and 150 only with a very bright projector or a fully dark room. Our 100 inch projector guide and the screen size calculator help with other sizes. Every projector in this guide outputs 16:9.
Seating distance matters as much as wall width. We calculated how wide the picture looks from the sofa, as the angle between the left and right edges. At 12 feet, an 80 inch picture spans 27.2 degrees, a 100 inch one 33.7, a 120 inch one 39.9 and a 150 inch one 48.8. At 9 feet the same four sizes span 35.8, 43.9, 51.7 and 62.4 degrees. At 15 feet they span 21.9, 27.2, 32.4 and 39.9.
A wide angle feels immersive for a film and tiring for a spreadsheet or a fast game, because you turn your head. Pick the screen for the seat you use most, and use the larger size only when the lumens allow it.
Step 2: What distance does each projector need?
Distance equals the throw ratio times the picture width. A projector with a 1.2:1 throw ratio needs 8.7 feet for a 100 inch picture. An ultra short throw model with 0.18:1 needs 1.3 feet. Our projector throw distance calculator does the sum for any size.
| Projector | Throw ratio | 100 in | 120 in | 150 in |
|---|---|---|---|---|
| JMGO N1S family, Mars 3 class, MoGo 4 Laser | 1.20:1 | 8.7 ft | 10.5 ft | 13.1 ft |
| Valerion VisionMaster Max, wide end | 0.90:1 | 6.5 ft | 7.8 ft | 9.8 ft |
| Valerion VisionMaster Max, tele end | 1.50:1 | 10.9 ft | 13.1 ft | 16.3 ft |
| JMGO O2S Ultra | 0.16:1 | 1.2 ft | 1.4 ft | 1.7 ft |
| XGIMI Aura 2 | 0.18:1 | 1.3 ft | 1.6 ft | 2.0 ft |
| Hisense PX3-Pro | 0.22:1 | 1.6 ft | 1.9 ft | 2.4 ft |
| Hisense L9H (UK spec), and the discontinued AWOL LTV-3500 Pro | 0.25:1 | 1.8 ft | 2.2 ft | 2.7 ft |
Check the table against ProjectorCentral's published ranges. It lists the Aura 2 from 1.2 to 1.9 feet, and the discontinued AWOL from 1.5 to 2.7 feet. For the full method, see how far a projector should be from the screen and throw ratio explained.
A reverse sum helps in a long room. If you can seat the projector 12 feet from the wall, a 1.2:1 lens gives a picture 120 inches wide, which is a 137.6 inch diagonal. That is more than most rooms need.
Step 3: Is the projector bright enough for that screen?
Divide the lumens by the screen area in square feet, then multiply by the gain. The result is foot-lamberts, a measure of how bright the picture looks. This is the formula Acoustic Frontiers gives. It cites 16 foot-lamberts as the dark-room target (SMPTE 196M), 40 for a room with some ambient light and 60 for a bright one.
The table uses rated lumens, so the real figure is lower. It shows a 1.0 gain screen and a 0.5 gain screen, the middle of a lenticular range.
| Projector (rated) | 100 in at 1.0 | 100 in at 0.5 | 120 in at 1.0 | 120 in at 0.5 |
|---|---|---|---|---|
| XGIMI Aura 2 (2,300 ISO) | 77.5 fL | 38.8 fL | 53.8 fL | 26.9 fL |
| Hisense L5H (2,700 lumens) | 91.0 fL | 45.5 fL | 63.2 fL | 31.6 fL |
| Hisense L9H (3,000), and AWOL (3,000, discontinued) | 101.1 fL | 50.5 fL | 70.2 fL | 35.1 fL |
| JMGO O2S Ultra (3,600 ISO) | 121.3 fL | 60.7 fL | 84.3 fL | 42.1 fL |
| Epson LS800 (4,000, discontinued) | 134.8 fL | 67.4 fL | 93.6 fL | 46.8 fL |
| XGIMI Aura 3 Max (5,700 ISO) | 192.1 fL | 96.0 fL | 133.4 fL | 66.7 fL |
Read the table with caution. ISO 21118 lumens and ANSI lumens are different tests, and ISO is the stricter one, according to Anker. A 0.5 gain screen halves the number, but it also darkens the black parts of the picture, so contrast improves when a room has light.
In a dark room, every row reaches 16 foot-lamberts with room to spare. In a room with some light, the Aura 2 on a 120 inch, 0.5 gain screen falls to 26.9, short of 40. Our how many lumens you need page and the daylight projector guide give targets by room.
Two projectors with the same lumens can need different screens. The Nebula Mars 3 puts 959 measured ANSI lumens on a 100 inch white screen at 32.3 foot-lamberts, a good number for a dark yard. Put the same projector on a 0.5 gain screen and you get 16.2, which is the dark-room minimum with nothing left over. The screen can cost you half your light, so match the two before you buy either.
Step 4: Which projector screen do you need for your room?
Choose the surface from the room light and the throw. In a dark room, a matte white screen with a gain of 1.0 gives the brightest, most even picture. With some ambient light, a gray screen holds blacks better. For an ultra short throw projector, use an ALR screen made for it.
The same rule answers most of the questions people type about screens. A matte white surface is the neutral choice, which is why most standard screens are white; the black vs white projector screen guide and the screen types explained page give the trade-offs. The screen material guide, the ALR paint page and the best projector screens page cover surfaces, paint and models.
On a plain white wall, an ultra short throw picture works in a dark room, but blacks go gray and every wall bump shows. A UST beam grazes the wall at a steep angle, so flaws stand out. That is why the kits above include a flat, fixed frame.
Step 5: Do the formats and ports line up?
The screen sets the shape and the projector sets the pixels. All the projectors here output 16:9, so a 16:9 screen fills with no black bars. A screen has no pixels, so a "4K screen" does not add resolution. Check the HDMI ports on the projector instead: the JMGO N1S Ultimate has two, the discontinued AWOL LTV-3500 Pro has one HDMI 2.0 and one HDMI 1.4a, and the discontinued Epson LS800 has three.
If the projector hangs from a ceiling, lens shift matters more than the screen. The Valerion VisionMaster Max has plus or minus 55 percent vertical lens shift and a 1.67x zoom, so you can mount it high or low and still fill a screen. The N1S family has no lens shift. Our aspect ratio guide covers non-16:9 cases.
Before you press a button, check five things on the listing. Each one has caught buyers in the kits above.
- The screen model and size: a listing that says only "with screen" is not enough.
- The brightness method: ISO, ANSI, CVIA or an unlabeled number cannot be compared.
- The throw ratio or the distance from the wall: it decides the cabinet or the shelf.
- The screen type: lenticular, Fresnel, matte white or gray changes the seating area.
- The return terms: a 100 inch frame is awkward to send back, so read them before you assemble it.
Which projector and screen pair fits each room?
The table pairs a projector with a screen size and a surface for each case. The brightness figure is foot-lamberts on a 1.0 gain screen, from measured lumens where we have them and rated lumens where we do not.
| Room | Projector | Lumens used | Screen | Distance | Brightness |
|---|---|---|---|---|---|
| Dark bedroom | JMGO N1S 4K | 1,100 (ProjectorCentral) to 1,700 ISO (JMGO) | 100 in matte white or gray | 8.7 ft | 37.1 to 57.3 fL |
| Living room with windows | JMGO N1S Ultimate | 2,700 ANSI (measured) | 120 in gray or ALR | 10.5 ft | 63.2 fL |
| TV wall, daylight | JMGO O2S Ultra | 3,600 ISO (rated) | 100 in lenticular or Fresnel ALR | 1.2 ft | 121.3 fL |
| Dark home theater | Valerion VisionMaster Max | 2,533 ANSI (measured, no enhancer) | 120 to 150 in matte white | 7.8 to 13.1 ft | 59.3 to 37.9 fL |
| Backyard | Nebula Mars 3 | 959 ANSI (measured) | 100 to 110 in white | Plan it with the calculator | 32.3 to 26.7 fL |
| Deck or gazebo | XGIMI MoGo 4 Laser | 550 ISO (rated) | 70 in portable | 6.1 ft | 37.8 fL |
| Campsite | Nebula Capsule 3 Laser | 302 ANSI (measured, Standard) | 60 in | Plan it with the calculator | 28.3 fL |
These pairings depend on measured and published numbers. The Valerion figure runs from 2,533 ANSI lumens without its Brightness Enhancer to 3,230 in a Projector Reviews measurement, so the 120 inch brightness rises if you use the enhancer.
Each pairing below follows the same logic. We start from the room, take the largest screen the lumens can support, then check the distance against the room depth. If the distance does not fit, we change the projector class, not the screen.
Bedroom: a small projector and an 80 to 100 inch screen
A bedroom needs a short distance and a dim picture. The N1S 4K weighs 4.4 pounds and has a 1.2:1 lens, so it needs 7.0 feet for 80 inches and 8.7 for 100. For a bedroom, a pull-down screen or a white wall is enough. See the bedroom projector guide and the mini projector guide.
Living room: the laser TV kit and a standard pair compared
A laser TV kit takes 1 to 2 feet of cabinet and a flat screen. A standard pair takes a shelf behind the sofa and a screen on the wall. The kit has the brighter, simpler picture. The standard pair needs no flat fixed-frame screen, and you can move the projector. If your couch sits 9 to 13 feet from the wall, a standard throw projector fits behind it.
The JMGO N1S Ultimate is the standard-throw pick at 2,600 to 2,800 measured ANSI lumens in normal modes. The rated 3,500 appears only in a mode with a strong green bias. Plan on 2,700.
Dark home theater: lens shift, zoom and a matte screen
In a dark room, contrast matters more than lumens. The Valerion VisionMaster Max lists 5,000:1 native contrast and a 0.9 to 1.5:1 zoom. Pair it with a matte white or gray screen of 120 to 150 inches. See the Valerion page and the 4K projector guide.
Backyard, deck, gazebo or garage: a portable pair
Outdoors, the surface has to survive wind and moisture, and the picture has to hold up at dusk. The Nebula Mars 3 measures 959 ANSI lumens at full power and has an IPX3 rating, which covers splashes, not rain. For a garage door or a wall, a plain white surface works at 100 to 110 inches. For a freestanding screen, look at the outdoor movie screen guide and the inflatable movie screen page.
An outdoor combo is also covered by the outdoor projector and screen guide for the people who search for whole setups, and by the best outdoor projector page for projector choice. Do not use an ultra short throw kit outside. Its screen is a flat frame meant for a wall.
Camping: the smallest pair
The Nebula Capsule 3 Laser weighs 2.1 pounds and measures 302 ANSI lumens in Standard mode, so it needs a dark site and a 40 to 60 inch screen. At 60 inches it gives 28.3 foot-lamberts; at 40 inches the 4.7 square feet give 64.3. Pair it with the portable projector screen and see the camping projector page.
Ceiling mount and drop-down screen
A ceiling mount and a drop-down screen is the classic home theater combo. It needs three things: a projector with lens shift or a short offset to fit the screen, a mount that matches the weight, and a throw distance that lands near the middle of the room. The Valerion VisionMaster Max has the shift; the N1S models are made to sit on a table. If the projector must go high, the lens shift decides the pair.
Another cost hides in the install. A laser TV needs a cabinet or stand with a flat top at the right height, and the screen needs a clear wall of at least 7.3 feet for 100 inches. A standard pair needs a shelf, a ceiling mount or a table, plus an HDMI run. Add those to the shopping list so the total is honest.
In what order do you set up the screen and the projector?
Set up the screen first, then the projector, because the screen cannot move after you hang it. The steps are the same for a pair and a kit, apart from the distance. Our setup guide covers the menus in detail.
- Mount or stand the screen where its center sits at eye level from your main seat, and keep a fixed-frame UST screen flat against a solid wall.
- Mark the projector spot from the distance table: 8.7 feet for 100 inches at 1.2:1, or about 1.2 to 1.8 feet from the wall for an ultra short throw model.
- Level the projector and center it on the screen. A UST projector must sit parallel to the wall, because a tilt skews the picture.
- Run the automatic focus and keystone, then fine tune by hand. The JMGO O2S Ultra adds 14 manual edge points for a wall that is not perfect, according to the Son-Video review we read.
- Connect the source by HDMI, then pick Standard or Movie mode and leave Ultra Brightness off.
- Check the edges with a white image, and move the projector a half inch at a time.
A laser TV also needs an extra day for the screen: Hisense says two people need about 1 to 2 hours to assemble it.
How much does a projector and screen cost?
We do not print prices. We have no reliable US price source, so a number here would be a guess. The cost has three parts: the projector, the screen and the mount or cabinet. The screen can add a large part of the total, and a kit can save or add money against two separate products.
Compare by total, not by listing. Price the projector, the screen, shipping and any mount. For a laser TV, include the cabinet. Our Black Friday projector deals page tracks sales, and the cheap projector guide covers a budget start.
Why are projector screens so expensive?
An ultra short throw ALR screen is an engineered optical surface, not a sheet of fabric. Fresnel and lenticular layers must be flat across 100 inches, and ProjectorScreen.com says Fresnel only comes as a pre-assembled fixed frame because of its resin layer. A plain matte screen is cheaper, because the surface does less.
Should you rent a projector and screen instead of buying a combo?
For one event, renting is reasonable. AV rental companies and some party-rental stores supply a projector and a screen with a stand. We have no verified US rental prices, so we cannot say where the break-even sits. If you will use the pair more than a few times a year, price a kit and compare it to your rental quotes.
What do you give up with a laser TV kit? Mainly the freedom to move. The cabinet stays near the wall and the screen stays flat on it. You also give up cheap screen swaps: a replacement for a UST screen has to be another UST screen. In return you get a picture with the lights on and no ceiling mount.
What do you give up with a standard pair? The tidy look. A projector sits on a shelf or the ceiling, a cable runs to it, and the screen needs a wall or a stand. You also need a darker room, because a matte screen does not reject light the way an ALR surface does.
Where do you find the answers about the screen alone?
Some questions belong to the screen, not to the combo. Each has its own page, and we keep the short answer here.
Do you need a screen? Not always, and the do you need a screen for a projector guide says when a wall is enough. The screen vs white wall comparison shows what a screen adds in contrast, color and evenness. In a combo, the screen is worth it whenever the projector is ultra short throw or the room has light.
White or black? A projector screen is white or gray because it reflects the picture. The black vs white projector screen page explains why black surfaces suit only ALR designs.
Power, weather and special screens. A motorized model needs an outlet, and the motorized screen guide covers it. For wet weather or a yard, the outdoor movie screen guide is the place. A see-through screen has its own page on transparent projector screens.
Eyes and blue light. A screen reflects light and does not emit any. How a projector compares with a TV for your eyes is covered on projector vs TV.
Daylight. Sunlight on the screen is the hardest case, and the daylight projector guide deals with it.
Laptops and phones. To show a computer or a phone on the screen, follow how to connect a projector to a laptop or how to mirror a phone screen to a projector.
Common mistakes with a projector and screen
Most poor combos come from one mismatch. The table lists the ones we see most and the fix.
| Mistake | What happens | Fix |
|---|---|---|
| Ultra short throw projector on a plain white wall in a lit room | Blacks turn gray, wall flaws show | Add a flat ALR screen made for UST |
| Planning on rated lumens | The N1S Ultimate is rated 3,500 ANSI but measures about 2,700 | Divide the measured figure by the screen area |
| Screen too large for the lumens | A 150 in picture has 2.25 times the area of 100 in | Drop to 100 or 120 in, or choose 3,000 lumens or more |
| Fresnel screen with seats far to the side | Picture dims off-axis | Choose lenticular, or seat everyone in front |
| Ignoring the frame | The 100 in Hisense L5H screen is 89.1 in wide | Measure the wall for the frame, not the picture |
| Mixing ISO and ANSI | The two tests differ, and ISO is stricter | Compare like with like |
| Buying a screen after the wall is ready | Assembly of a laser TV screen takes two people, 1 to 2 hours | Plan the day |
How we checked these combos
We read the maker pages, ProjectorCentral spec tables and retailer listings between 15 and 17 November 2026. We kept a kit in the table only when a listing named both the projector and the screen. We have not tested any projector or screen, and we say where a figure is a maker claim.
Open points we could not confirm: the gain and the ambient light rejection of the screens inside the AWOL, JMGO and Aura bundles, the US availability of the Aura 2 bundle, the Hisense L9H throw ratio in the US, and any measured brightness for the Aura 3 Max. Where makers and labs disagree, we show both. ProjectorCentral lists the JMGO N1S 4K at 1,100 ISO lumens against JMGO's 1,700.
Keep reading: guides by need
- Screens: best projector screens, portable screens, outdoor movie screens
- Projector type: ultra short throw projectors, short throw projectors, laser projectors
- Brands: JMGO, XGIMI, Epson, Hisense
- Setup: how to set up a projector, projector on a wall
FAQ
Can you rent a projector and screen?
Yes. Event and AV rental companies supply both, often with a stand. We found no verified US rental prices, and local shops set their own, so ask for quotes with delivery included. If you rent more than a few times a year, price a kit against the quotes. Our portable screen guide covers the small ones you can own.
Where should you buy a projector and screen together?
Buy from the maker or from an authorized retailer, because warranty terms depend on it. B&H listed the AWOL Vision kits before the projector was discontinued, and Best Buy lists Epson and Fugoo products. Check the listing for the screen model and size, because the same projector name often appears with and without a screen.
Can you install a projector and screen yourself?
Yes for a standard pair on a table and a pull-down or freestanding screen. A laser TV screen is heavier: Hisense says two people need about 1 to 2 hours to assemble it. A ceiling mount with a drop-down screen needs studs and wiring, so hire a pro if you are unsure.
Does a projector screen need to be against a wall?
No. A screen can hang on a wall, drop from a ceiling or stand on a floor or a frame. An ultra short throw screen must be flat, so a rigid fixed frame or a floor-rising screen is the usual choice. A tripod screen gives the same picture as a wall screen but moves in wind.
Can an ultra short throw projector use a regular white screen?
It works in a dark room, but blacks go gray and any bump in the surface shows, because the beam grazes it at a steep angle. In a room with light, use an ALR screen made for ultra short throw. See the JMGO O2S Ultra page.
Does a 4K projector need a 4K screen?
No. A screen has no pixels, so the projector sets the resolution. A "4K screen" label describes a smooth surface, not extra detail. Choose by gain, surface type and size.
Does any projector work with any screen?
Almost always on paper, but the match decides the picture. A standard projector on a UST screen, or a UST projector on a standard screen, loses brightness or washes out. Check that the screen type fits the throw ratio, and that the screen size fits the lumens.
How long does the projector in a kit last?
The light source decides it. ProjectorCentral lists a 20,000 hour laser for the Aura 2, Hisense lists 25,000 hours for the L5H and the JMGO N1S family is rated at 30,000. At 4 hours a day, 20,000 hours is about 13.7 years. A lamp model such as the Epson Home Cinema 2350 has a shorter rating, so check its page.
Which kit needs the least room?
An ultra short throw kit. At 0.16:1 to 0.25:1, the projector sits 1.2 to 1.8 feet from a 100 inch screen. A standard 1.2:1 projector needs 8.7 feet.
Does a combo work in daylight?
A laser TV kit with an ALR screen handles room light better than a standard pair. Direct sun on the screen still beats every kit here. See the daylight projector guide.
Is a kit cheaper than buying the pieces?
Not always. Retailer bundle prices can differ widely from the sum of the parts, and one listing we saw showed inconsistent figures. Price the projector, the screen and shipping both ways.
Should the screen be bigger than the picture?
Only slightly. Size the picture to the screen, so the edges fall on the frame. A projector that overshoots the screen wastes light on the wall, and one that undershoots leaves a border.
Sources
- ProjectorCentral: Hisense PX3 PRO
- ProjectorCentral: XGIMI Aura 2
- ProjectorCentral: AWOL Vision LTV-3500 Pro
- ProjectorCentral: XGIMI MoGo 4 Laser
- Notebookcheck: Hisense L9H and L5H with ALR screens in the US
- Hisense Canada: 100L5H
- Hisense USA: Laser TV FAQ
- AWOL Vision: LTV-3500 Pro Daylight ALR screen bundle
- B&H: AWOL Vision LTV-3500 Pro with ALR-D100 screen
- ProjectorScreen.com: JMGO O2S Ultra
- Epson: EpiqVision Ultra LS800
- XGIMI: Aura 3 series Kickstarter bundles
- B&H: XGIMI MoGo 4 Laser Outdoor Collection
- ProjectorScreen.com: lenticular vs Fresnel screens for ultra short throw
- Elite Screens: screen terminology
- Acoustic Frontiers: image brightness targets and foot-lamberts
- Anker: ISO lumens vs ANSI lumens
Keep comparing
ProjectorWe compare 10 home projectors for 2026, from budget to 4K laser, with real brightness, throw distance
Portable Projector 2026Nine real models compared on weight, rated and measured lumens, battery life and ports, with picks for travel
Home Theater ProjectorEight home theater projectors compared for 2026 by contrast, black level, HDR, lens, noise and screen size
Mini Projectors for 2026Nine real pocket models compared on weight, ANSI lumens, battery, ports and picture size
