Best Short Throw Projector (2026): Distances, Shadows and Eight Models You Can Buy

By the Home Projector Guide team · Updated · How we research

As an Amazon Associate I earn from qualifying purchases.

8 models named · 8 tables · 18 questions answered · checked November 2026

Summarize withChatGPTPerplexity

Illustration: short throw projector setup in a home

The BenQ TK710STi is the short throw projector to buy for gaming and movies: 4K, a 3,200 ANSI lumen laser rated for 20,000 hours, and a lens that fills 100 inches from 5.0 to 6.0 feet. If your wall gives you less room, the Optoma GT2000HDR needs 3.6 feet. We compared eight models sold in the United States on distance, brightness, light source, resolution and input lag, using maker sheets and ProjectorCentral data. We have not tested any. Every distance is calculated from the published throw ratio.

Which projector fits your wall? Get this one, get that one

The question is less "which is best" than "how many feet do I have between the screen and the projector".

  • Get the BenQ TK710STi if you have 5.0 to 6.0 feet to a 100 inch screen and you want 4K, a laser that lasts 20,000 hours and a 1.2x zoom to fine-tune the size.
  • Get the Optoma GT2000HDR if the projector has to sit 3.6 feet from the screen, 1080p is enough, and a 6.6 lb body suits a shelf or a ceiling mount.
  • Get the BenQ X500i if you want 4K from an LED source rated for 20,000 hours and can live with 2,200 ANSI lumens in a dim room.
  • Get the BenQ TH671ST if you want the lowest cost for a 1080p picture and accept a lamp rated for 4,000 hours.
  • Neither if the gap is under 3 feet. Then you need an ultra short throw model such as the JMGO O2S Ultra, which sits 0.9 to 1.8 feet from the screen. Our ultra short throw guide covers that group.

Our picks at a glance

  • 1BenQ TK710STia family room of 12 feet or more where you game and watch movies, with the projector 5 to 6 feet from a 100 inch screenCheck price
  • 2BenQ X500ia bedroom, basement or den where you control the lightCheck price
  • 3Optoma GT2000HDRa wall that is 10 to 12 feet deep and a screen of 100 to 120 inchesCheck price

Quick answer: what to know before you buy

  • Short throw means 0.4 to 0.8:1 in this guide. The distance from lens to screen is the ratio times the image width. A 100 inch 16:9 image is 87.2 inches wide, so a 0.5:1 lens sits 43.6 inches (3.6 feet) away.
  • Pick on the wall gap first. Our eight models need between 3.6 and 6.0 feet for 100 inches and between 4.4 and 7.2 feet for 120 inches.
  • Rated lumens are a ceiling. A 100 inch screen needs about 475 lumens for a 16 foot-lambert picture in a dark room, and 120 inches needs about 684. Real output is lower than the sticker.
  • Only the BenQ models zoom. The three BenQ 0.69 to 0.83:1 projectors have a 1.2x optical zoom. The Optoma 0.5:1 models have a fixed lens and digital zoom, so you place them by distance.
  • Many guides still list models that are gone. The Optoma GT1080HDR, GT1090HDRx and EH412ST, the BenQ X300G and the BenQ TK700STi are discontinued. We list them in a warning table, not in the picks.
  • We have not tested any of these. We read maker sheets and ProjectorCentral, and we mark rated figures as rated.

What is a short throw projector, and where does the line sit?

A short throw projector is one whose wide-angle lens makes a large image from a short distance, with a throw ratio of roughly 0.4 to 0.8:1 in this guide. A standard projector uses 1.2:1 or more. An ultra short throw model uses less than 0.4:1 and sits below the screen like a TV stand. Makers and retailers draw the line in different places, and some call 1.1:1 lenses short throw. We use ratios, not labels, so the table below does not depend on a marketing word.

TypeThrow ratioLens to a 100 inch screenWhere it sits
Standard (long) throw1.2:1 and up8.7 feet and upCoffee table, rear shelf, ceiling at the back
Short throw0.4 to 0.8:12.9 to 5.8 feetCeiling mount mid-room, low table, shelf in front
Ultra short throwUnder 0.4:1Under 2.9 feetMedia cabinet directly under the screen

The distances in the third column come from our calculation: ratio times 87.2 inches. For the full explanation of the ratio, read the throw ratio explainer, the page on the short throw projector definition and the comparison of short throw against long throw. If your room is deep, the long throw guide fits better.

The JMGO N1S family is a good example of the confusion. It is often called short throw in shopping guides, but its published ratio is 1.2:1, which needs 8.7 feet for 100 inches. It is a standard throw projector with a gimbal.

How does a short throw projector work, and what do you give up?

A short throw projector bends the light out of the lens at a steep angle, so a small distance becomes a wide picture. The lens is built with more glass elements and a wide field, which is why most short throw models have a fixed focal length with no optical zoom. The image goes from the lens up and out at an angle, so the screen must be flat and the lens must sit square to it.

The wide angle brings four trade-offs.

  • Less zoom. The Optoma GT2000HDR, GT2100HDR and 4K400STx have a fixed lens with manual focus and digital zoom only. Digital zoom shrinks the image instead of changing the optics.
  • Less placement freedom. If you move the projector a few inches, the image grows or shrinks by a large amount. At 0.5:1, a 6 inch change in distance changes the width by about 12 inches.
  • Sensitivity to wall flatness. A bump of half an inch on the wall bends the picture, because the light arrives at a steep angle.
  • Brightness for the money. The wide-angle lens loses some light, so makers put in a stronger source.

Shadows are the other limit. When the lens sits 3.6 feet from the screen, a person standing between the two can still block the beam, but a ceiling mount puts the beam above head height. We come back to that below.

How far does a short throw projector need to be from the screen?

Multiply the throw ratio by the image width. At 0.5:1 a 100 inch 16:9 screen needs 3.6 feet, a 120 inch screen needs 4.4 feet and a 150 inch screen needs 5.5 feet. At 0.69:1 the same screens need 5.0, 6.0 and 7.5 feet. These distances run from the lens to the screen and ignore the lens position inside the case, so add 2 to 3 inches for the body.

Throw ratio80 inch100 inch120 inch150 inchModels
0.50:12.9 ft3.6 ft4.4 ft5.5 ftOptoma GT2000HDR, GT2100HDR, 4K400STx
0.52:13.0 ft3.8 ft4.5 ft5.7 ftViewSonic PS502W
0.61:13.5 ft4.4 ft5.3 ft6.7 ftBenQ MW826STH
0.69:14.0 ft5.0 ft6.0 ft7.5 ftBenQ TK710STi, X500i, TH671ST (near end of the zoom)
0.83:14.8 ft6.0 ft7.2 ft9.0 ftBenQ TK710STi, X500i, TH671ST (far end of the zoom)
1.20:17.0 ft8.7 ft10.5 ft13.1 ftJMGO N1S family, for comparison

The BenQ numbers have a range because of the zoom. ProjectorCentral lists the TK710STi at 5 to 6 feet for the screen in its placement note, which matches our 5.0 to 6.0 feet at 100 inches. The BenQ TH671ST page gives 4.9 feet for 100 inches. BenQ's own regional pages disagree for the TK710STi, quoting 5 feet on one and 6.5 feet on another for 100 inches, so measure with the ratio, not the sentence. Use the projector throw distance calculator for your own screen, and read how far a projector should be from the screen if the room also needs a seating plan.

The seats come after the screen. Short throw models suit rooms about 12 feet deep: the projector uses the front 4 to 6 feet and the seats use the rest.

Which short throw projector is best? The eight models side by side

The BenQ TK710STi is the one to choose first, because it has 4K, a laser, a zoom and a gaming lag of 16.7 ms at 4K/60. The table puts all eight on one screen. Every row is on sale as of November 2026 according to ProjectorCentral, and every brightness figure is the maker's rating, not a measurement.

ModelPick forThrow ratioRated brightnessResolutionLight sourceWeight
BenQ TK710STiGaming and movies0.69 to 0.83:13,200 ANSI lm3840 x 2160Laser phosphor, 20,000 h6.8 lb
BenQ X500i4K without a lamp0.69 to 0.83:12,200 ANSI lm3840 x 2160LED, 20,000 h7.9 lb
Optoma GT2000HDRTightest wall0.50:13,500 ANSI lm1920 x 1080Laser phosphor, 30,000 h6.6 lb
Optoma GT2100HDRBrightest 1080p0.50:14,200 ANSI lm1920 x 1080Laser phosphor, 30,000 h6.6 lb
Optoma 4K400STx4K at 0.5:10.50:14,000 ISO lm3840 x 2160Lamp, 4,000 h8.8 lb
BenQ TH671STLowest cost 1080p0.69 to 0.83:13,000 ANSI lm1920 x 1080Lamp, 4,000 h6.0 lb
ViewSonic PS502WCheap, bright, low detail0.52:14,000 ANSI lm1280 x 800Lamp, 4,000 h6.3 lb
BenQ MW826STHOffice and classroom0.61:13,500 ANSI lm1280 x 800Lamp, 6,000 h5.7 lb

Light source hours are the normal-mode figure. Eco mode raises the lamps to 15,000 hours on the BenQ TH671ST and Optoma 4K400STx, 12,000 on the ViewSonic and 15,000 on the BenQ MW826STH. The BenQ TK710STi and X500i list 30,000 hours in Eco mode for the laser and the LED. Laser models are the ones to buy if the projector will run most evenings.

BenQ TK710STi: the gaming and movie pick

The BenQ TK710STi is a 4K laser phosphor projector rated at 3,200 ANSI lumens, with a 0.69 to 0.83:1 lens and a 1.2x manual zoom. ProjectorCentral lists 600,000:1 dynamic contrast, 6.8 lb, 31 dB (28 dB in Eco), two HDMI 2.0 ports and input lag of 16.7 ms at 4K/60, 8.3 ms at 1080p/120 and 4.2 ms at 1080p/240. It was released in June 2024.

Brightness needs care. ProjectorCentral has not published a measurement of the STi. It measured the related BenQ TK710, a 4K laser projector with a longer lens, at 2,478 ANSI lumens in its brightest mode with a green cast, which is below the rating. Expect a real picture below 3,200 lumens on the STi too.

Best for: a family room of 12 feet or more where you game and watch movies, with the projector 5 to 6 feet from a 100 inch screen. Not for: a rack under 3 feet from the wall, because the zoom cannot reach below 0.69:1.

Check price

BenQ X500i: 4K from an LED

The BenQ X500i is a 4K LED projector rated at 2,200 ANSI lumens, with the same 0.69 to 0.83:1 lens and 1.2x zoom as the TK710STi. ProjectorCentral lists 600,000:1 dynamic contrast, 20,000 hours of LED life (30,000 in Eco), 7.9 lb, two HDMI 2.0 ports and 16.7 ms of lag at 4K/60, 8.3 ms at 1080p/120 and 4.2 ms at 1080p/240. It was released in November 2023.

The X500i trades 1,000 lumens against the TK710STi for no lamp and a long-lived LED. In a room you can darken, 2,200 lumens fill 100 inches to about 74 foot-lamberts by our calculation, which is far above the 16 foot-lamberts a dark room needs.

Best for: a bedroom, basement or den where you control the light. Not for: a bright living room with windows, where 2,200 rated lumens run out faster than the 3,200 of the STi.

Check price

Optoma GT2000HDR: the shortest distance

The Optoma GT2000HDR is a 1080p laser phosphor projector rated at 3,500 ANSI lumens and 30,000 hours, with a 0.50:1 lens that puts a 100 inch picture 3.6 feet from the screen. ProjectorCentral lists 300,000:1 dynamic contrast, two HDMI 2.0 ports, 34 dB (32 dB in Eco), 6.6 lb and a fixed lens with digital zoom only. It has been shipping since June 2023.

The lens does not zoom and does not shift. That means you set the distance, then fine-tune with the foot and the mount. Optoma's own sheets list 8.6 ms of lag at 1080p/120 and 17 ms at 4K/60, and a throw ratio of 0.496:1.

Best for: a wall that is 10 to 12 feet deep and a screen of 100 to 120 inches. Not for: anyone who wants native 4K detail or a fine adjustment by zoom.

Check price

Optoma GT2100HDR: more light at 0.5:1

The Optoma GT2100HDR is the brighter sibling: ProjectorCentral lists 4,200 ANSI lumens in the table and 4,000 in the highlights, with the same 1080p, 0.50:1 lens, 30,000 hour laser and 6.6 lb body. The page lists 300,000:1 dynamic contrast, two HDMI 2.0 ports, 34 dB (32 dB in Eco) and input lag "as low as 4.2 ms" at 1080p/240. It has shipped since June 2023.

Be careful with the 4,200 figure. ProjectorCentral's review of the Optoma ZH450ST, a commercial model with a 0.5:1 lens, 6.6 lb weight and a 4,200 lumen rating, says it fell well short of its claim. We do not know the exact link between the two, so treat the GT2100HDR rating as a ceiling too.

Best for: a room with windows where you want a 1080p picture at 100 to 120 inches. Not for: a dark theater, where the GT2000HDR gives the same picture at a lower rating.

Check price

Optoma 4K400STx: 4K at 0.5:1 with a lamp

The Optoma 4K400STx is a 4K lamp projector rated at 4,000 lumens, with a 0.50:1 lens, a 4,000 hour lamp (15,000 in Eco) and the quietest fan on the list, 28 dB (24 dB in Eco). ProjectorCentral lists the rating as ISO in the spec table and ANSI in the highlights, so the page disagrees with itself. It lists two HDMI 2.0 ports, 8.8 lb, a fixed lens with no shift and 4.2 ms of lag at 1080p/240. It has shipped since October 2022.

A lamp lasts 4,000 hours, which is 3.7 years at 3 hours a day. That is the cost of 4K at 0.5:1 with this model. If you need the laser, the BenQ TK710STi or X500i is the better path, but neither reaches 0.5:1.

Best for: a short wall and 4K input with a quiet fan. Not for: someone who dislikes lamp changes.

Check price

BenQ TH671ST: the lowest-cost 1080p

The BenQ TH671ST is a 1080p lamp projector rated at 3,000 ANSI lumens, with a 0.69 to 0.83:1 lens, a 1.2x zoom and a 6.0 lb body. ProjectorCentral lists 10,000:1 dynamic contrast, a lamp rated for 4,000 hours (15,000 in Eco), 33 dB (29 dB in Eco), one HDMI port with MHL and input lag of 16.4 ms at 1080p/60 and 8 ms at 1080p/120. A 100 inch picture sits about 4.9 feet from the screen on its page and 5.0 feet by our calculation.

It is the one to take if the budget is tight and you play 1080p. The single HDMI port means you need a switch for a console and a streamer.

Best for: a first short throw projector for a family room. Not for: 4K sources or a theater with more than one box.

Check price

ViewSonic PS502W: bright, but 1280 x 800

The ViewSonic PS502W is a 0.52:1 lamp projector rated at 4,000 ANSI lumens, with a native 1280 x 800 picture and a 6.3 lb body. ProjectorCentral lists 15,000:1 dynamic contrast, a 240 W lamp rated for 4,000 hours (12,000 in Eco), digital zoom only, and a throw range of 2.2 to 11.0 feet for 59.9 to 300.4 inches. The page says one HDMI 1.4 port in the table and "dual HDMI inputs" in the highlights, so check the manual.

A 1280 x 800 picture on a 100 inch screen has coarse pixels: 1,280 pixels across 87.2 inches is 14.7 pixels per inch, against 22.0 for 1080p. That suits slides and spreadsheets, less so movies.

Best for: a school room or a shop where brightness and a short distance matter more than detail. Not for: a home theater.

Check price

BenQ MW826STH: office and classroom

The BenQ MW826STH is a 0.61:1 projector rated at 3,500 ANSI lumens, with a 1280 x 800 picture, a lamp rated for 6,000 hours (15,000 in Eco) and a 5.7 lb body. ProjectorCentral lists 20,000:1 contrast, two HDMI ports, 33 dB (29 dB in Eco), digital zoom only and a June 2021 release. A 100 inch picture sits 4.4 feet from the screen.

We include it as the lightest and the longest-lasting lamp of the eight. It is a business projector, so skip it for a living room. See the office projector guide and the classroom projector guide for the wider set.

Best for: a meeting room or a classroom with a short wall. Not for: movies in 4K.

Check price

Before the warnings, one more way to read the list: start from the gap you measured.

Gap from screen to lens, 100 inch pictureFitsWhy
3.6 to 4.4 feetOptoma GT2000HDR, GT2100HDR, 4K400STx, ViewSonic PS502W, BenQ MW826STHRatios 0.50 to 0.61:1, fixed lens
5.0 to 6.0 feetBenQ TK710STi, X500i, TH671ST0.69 to 0.83:1 with 1.2x zoom
6.6 to 7.8 feetBenQ TK700STi (discontinued), or any standard throwRatio 0.90 to 1.08:1 or more
Under 3 feetUltra short throw onlyRatio under 0.4:1

Which models should you skip because they are discontinued?

Skip the old favorites that appear in many lists: five short throw projectors are out of production according to ProjectorCentral. A guide that recommends them sends you to the used market. We keep them in a table so you can recognize them and compare with the new ones.

ModelThrow ratioStatusRelease
Optoma GT1080HDR0.50:1Discontinued August 2023Not listed
Optoma GT1090HDRx0.50:1Discontinued August 2023September 2022
Optoma EH412ST0.50:1Discontinued December 2022July 2019
BenQ TK700STi0.90 to 1.08:1Discontinued April 2025May 2021
BenQ X300G0.69 to 0.83:1Discontinued April 2025January 2024
ViewSonic PX748-4K1.13 to 1.47:1Discontinued August 2025May 2021
Optoma GT56000.25:1 (ultra short throw)Discontinued October 2024September 2018

Two of these also teach a lesson about labels. The BenQ TK700STi is sold as a short throw gaming projector, but its lens runs 0.90 to 1.08:1, so a 100 inch picture needs 6.6 to 7.8 feet. The ViewSonic PX748-4K is a 1.13:1 model. Both are closer to standard throw than to the 0.5:1 class. If you find one used, check the distance before you pay. For a gaming ranking that includes them, see the gaming projector guide.

What lumen rating suits a 100 inch short throw picture?

A 100 inch screen needs about 475 lumens for a 16 foot-lambert picture in a dark room and a 120 inch screen needs about 684. That is the real light a screen should return, and every projector here has more rated light than that. The difference is how much light the room steals.

We calculate the foot-lamberts as lumens divided by screen area, 29.7 square feet at 100 inches and 42.7 at 120 inches, for a white screen with a gain of 1.0. These are rated numbers. In real modes the output is lower. The projector with the lowest rating, the BenQ X500i, still gives about 74 foot-lamberts at 100 inches on paper.

Rated lumensModelfL at 100 inchesfL at 120 inches
2,200BenQ X500i7451
3,000BenQ TH671ST10170
3,200BenQ TK710STi10875
3,500Optoma GT2000HDR, BenQ MW826STH11882
4,000Optoma 4K400STx, ViewSonic PS502W13594
4,200Optoma GT2100HDR14298

Makers rate lumens under ANSI or ISO 21118 test methods, and ISO 21118 is the strictest lumen test, so an ISO figure is not a bonus over an ANSI one. Real output is lower still. A related BenQ, the TK700STi, measured 2,584 ANSI lumens in Bright mode and 1,625 in its Cinema and Game modes, against 3,000 rated, which is a 37% drop between modes for a model released in May 2021. The same gap applies to a movie mode on the models above. Read our lumens guide for the method, and the daylight projector guide if sun reaches the screen.

Is a short throw projector bright enough with the curtains open?

They work in a lit room, not in direct sun. A 3,500 to 4,200 lumen rating helps, but the room still needs curtains. A short throw projector is brighter on the screen than a standard throw model of the same rating only if its lens loses less light, which is not guaranteed, so compare rated lumens, not the label. For a lit room the Optoma GT2100HDR (4,200 ANSI lumens rated) and the BenQ TK710STi (3,200 rated) lead the list. Brighter picks live in the bright room guide.

What screen should you use with a short throw projector?

A flat matte white screen of 100 to 120 inches works for a dark room, and a gray or ambient-light-rejecting screen helps when light enters the room. Short throw is not ultra short throw: you do not need the ridged ultra short throw screen, and that kind is designed for light that arrives steeply from below, so it does not suit a 0.5:1 projector on a ceiling mount. Ask the screen maker which projector ratios it supports before you buy.

Screen typeUse with a 0.4 to 0.8:1 projectorNote
Matte white, 100 to 120 inchesYes, dark or dim roomCheapest, shows room light
Gray or ambient-light-rejectingYes, lit roomCheck the maker's ratio range
Ridged ultra short throw ALRNot advisedMade for light from steeply below
Painted wallPossible, dark roomBumps show at a steep angle

The wall may be enough at first. Paint can work in a dark room, but a bump or a seam shows up with the steep angle. We rank screens in the projector screens guide, and if you want the screen and the projector as a pair, see the projector and screen combo guide. The ALR screen guide covers rooms with light.

How do you mount a short throw projector?

Mount it on the ceiling upside down or put it on a low table in front of the screen, and fix the distance first. A 0.5:1 projector sits 3.6 feet from a 100 inch screen, so a ceiling mount puts the body about as far from the wall as a coffee table would. The mount should be a plate that you can slide forward and back by a few inches, since a fixed lens cannot correct a bad distance.

Three steps cover it.

  1. Mark the distance. Multiply the throw ratio by the width of the image, for example 0.5 x 87.2 inches = 43.6 inches for 100 inches. Add 2 to 3 inches for the body.
  2. Set the height. A projector without lens shift, like the Optoma GT2000HDR, sends the image up from the lens. Check the vertical offset on the maker's sheet before you drill a hole.
  3. Test at the table. Put the projector on a tall stand first and check the image. Then fix the mount.

Read the ceiling mounted projector guide and the page on a short throw projector ceiling mount for the hardware. Keep keystone correction off where you can, because it softens the picture.

Gaming, golf simulators and other jobs for a short throw lens

For gaming, the BenQ TK710STi and X500i list 16.7 ms at 4K/60 and 4.2 ms at 1080p/240, which are maker and ProjectorCentral figures, not lab readings. The Optoma lag is similar. A short throw lens suits gaming because the player stands in front of the screen and the projector sits behind or above, so the beam is not blocked.

Model4K/601080p/601080p/1201080p/240
BenQ TK710STi16.7 ms16.7 ms8.3 ms4.2 ms
BenQ X500i16.7 ms16.7 ms8.3 ms4.2 ms
Optoma 4K400STxnot listednot listednot listed4.2 ms
Optoma GT2100HDRnot listednot listednot listedas low as 4.2 ms
BenQ TH671STnot applicable16.4 ms8 msnot listed

All of these are rated. See the short throw gaming projector page and the 4K gaming projector guide for lab measurements.

A golf simulator is another job where distance decides. The ball and the club need space, so the projector sits above and in front of the hitter, and a lens at 0.5:1 can be mounted 3.6 feet from a 100 inch screen. Check that the image fits the hitting screen and that the mount clears the swing. Our plan has no separate golf guide yet, so use the throw table above and read the maker's sheet.

Short throw or ultra short throw: which should you buy?

Buy short throw if you have 3.6 feet or more and a ceiling or shelf. Buy ultra short throw if the projector has to sit on a cabinet under the screen. Short throw models are lighter (5.7 to 8.8 lb in our group against 19.8 lb for the Hisense PX3-Pro) and cost less to carry, and ultra short throw models avoid the shadow from people. For a laser TV that replaces a television, go to the Hisense laser TV page and the laser projector guide.

If your questions are about how ultra short throw lenses work, what they cost, how to mount them or what screen they need, those belong to the ultra short throw guide. It answers how ultra short throw projectors work, what an ultra short throw projector is, whether they are worth it, why they cost more, whether they can be ceiling mounted and what screen they need.

What should you check before you buy a short throw model?

Choose by the number of feet you have, then by resolution, light source, zoom, lag and ports. Each choice removes models, and the order saves time.

  1. Distance. Measure the gap from the screen to where the projector can sit. A gap of 3 to 4 feet means 0.5:1. A gap of 5 to 6 feet means the BenQ 0.69 to 0.83:1 range.
  2. Resolution. For 100 inches or more, 1080p shows its pixels. Take 4K if you sit close. The BenQ TK710STi, X500i and Optoma 4K400STx accept 3840 x 2160.
  3. Light source. A laser lasts 20,000 to 30,000 hours, which is 18 to 27 years at 3 hours a day. A lamp lasts 4,000 hours, or 3.7 years at the same use.
  4. Zoom. Only the BenQ 0.69 to 0.83:1 models zoom optically. A fixed lens needs an exact distance.
  5. Lag. For consoles, take 4.2 ms at 1080p/240, as on the BenQ and Optoma 4K400STx. Games at 60 Hz work with 16.7 ms.
  6. Ports and noise. Two HDMI 2.0 ports on most 4K models. The Optoma 4K400STx is the quietest at 28 dB.

For a wider look, the home theater projector guide covers dark rooms, the 4K projector guide covers resolution, and the cheap projector guide covers cost. If the room is small, read the short throw projector for a small room and small room projector pages. Brand-specific pages include the BenQ short throw projector guide, the 4K short throw guide and the budget short throw guide. The main page for all types is our best projector guide.

How do you set up a short throw projector in a small room?

Put the projector on a stand at the distance from the table, lock it, then align the picture. Short throw suits rooms 10 to 12 feet deep. Set the distance with a tape measure, point the lens square to the wall, focus on small text, and then trim the size with the zoom if the lens has one. A projector with a fixed lens, like the Optoma GT2000HDR, takes a move of the whole body. The setup guide has the full steps. If you must use the wall, our projector on a wall guide lists what to check.

How we chose these projectors

We used maker pages and ProjectorCentral's spec database, read on 17 November 2026. We kept projectors with a throw ratio between 0.4 and 0.83:1 that ProjectorCentral lists as shipping, we left out ultra short throw models, and we dropped one whose page disagreed on its own throw range. We have not tested any projector. Brightness figures are rated, and we say when a related model was measured. Open points we could not confirm: the exact measured lumens of every model here, and whether ProjectorCentral's 4,200 lumen figure for the GT2100HDR is ANSI or a maker claim.

FAQ

What is a short throw projector?

A short throw projector is one with a wide-angle lens that makes a big image from a short distance, usually a throw ratio of 0.4 to 0.8:1. At 0.5:1 it needs 3.6 feet for a 100 inch picture. A standard model needs 8.7 feet at 1.2:1.

What does short throw projector mean?

It means the projector can sit close to the screen. The label has no fixed standard, so check the throw ratio, not the name. The BenQ TK700STi is sold as short throw at 0.90 to 1.08:1, while the Optoma GT2000HDR is 0.50:1.

What is short throw projector ratio?

The throw ratio is the distance from lens to screen divided by the image width. For a 100 inch 16:9 image the width is 87.2 inches, so 0.5:1 gives 43.6 inches. Lower numbers mean a closer projector. See the throw ratio explainer.

What distance is a short throw projector?

A 0.5:1 model sits 3.6 feet from a 100 inch screen, and a 0.69 to 0.83:1 model sits 5.0 to 6.0 feet. For 120 inches add about 20 percent: 4.4 feet and 6.0 to 7.2 feet.

How do short throw projectors work?

They use a wide-angle lens that sends the light out at a steep angle, so a large image forms close to the screen. The price is a fixed lens, little or no zoom and sensitivity to a flat wall.

How long do short throw projectors last?

It depends on the light source. A lamp is rated for 4,000 hours (12,000 to 15,000 in Eco), which is 3.7 years at 3 hours a day. A laser or LED is rated for 20,000 to 30,000 hours, which is 18 to 27 years at the same use.

How good are short throw projectors?

They are good for rooms that are 10 to 12 feet deep or less. The picture matches a standard projector of the same chip and rating, with two limits: less zoom and a stronger need for a flat wall. The better models here carry 4K and a laser.

How much do short throw projectors cost?

We do not print prices, because they move often and we have no reliable US price feed. Cost follows the chip and the light source: a 1080p lamp model sits at the bottom and a 4K laser model at the top. Use the "Check price" buttons for today's figure.

Why are short throw projectors more expensive?

The wide-angle lens needs more glass and tighter manufacturing, and makers add brighter light sources to make up for lost light. A short throw model is often priced above a standard projector of the same resolution.

Are short throw projectors worth it?

Yes if the room is short or the ceiling mount is hard to place. A standard model costs less in a long room. If you can sit the projector 9 feet from the screen, you do not need short throw.

What is a short throw projector used for?

Home theaters in small rooms, gaming, classrooms, meeting rooms, retail displays and golf simulators. All of them benefit from a shorter beam path and a shadow that is easier to avoid.

What is the difference between a short throw and long throw projector?

A long throw projector sits 8.7 feet or more from a 100 inch screen. A short throw one sits 2.9 to 5.8 feet. Long throw lenses zoom more and cost less. See short throw against long throw.

Do short throw projectors need a special screen?

No. A flat matte white or gray screen works. The special ridged screens are for ultra short throw. See the UST screen guide if you want one.

Can short throw projectors be ceiling mounted?

Yes. Many are made for it. Mark 43.6 inches from the wall for a 0.5:1 model at 100 inches, check vertical offset on the sheet and use a mount that slides. See the short throw ceiling mount page.

How do you set up a short throw projector?

Measure the distance, set the body square to the wall, focus on small text and use the zoom or digital zoom to trim the picture. The lens must be level because the angle is steep.

What is a short throw laser projector?

It is a short throw projector with a laser or laser phosphor light source, such as the BenQ TK710STi (3,200 ANSI lumens, 20,000 hours) or the Optoma GT2000HDR (3,500 ANSI lumens, 30,000 hours). See the short throw laser projector page.

What is a 4K short throw projector?

It is one that accepts or shows a 3840 x 2160 picture. In our group the BenQ TK710STi, X500i and Optoma 4K400STx do. See the 4K short throw guide.

Where can you buy a short throw projector?

The makers (BenQ, Optoma, ViewSonic) and large US retailers sell them. Use the Check price buttons to see the current offer, and check the stock status because several well-known models are discontinued.

Sources