Best DLP Projector (2026): Chip Size, Light Source and Ten Models Compared

By the Home Projector Guide team · Updated · How we research

As an Amazon Associate I earn from qualifying purchases. Some links go to brand stores through a partner program, which can pay us a commission at no cost to you.

10 mirror-chip models sorted by light source, 4 Texas Instruments chip sizes, brightness worked out at 3 screen sizes · updated November 2026

10 models named · 7 tables · 12 questions answered · checked November 2026

Summarize withChatGPTPerplexity

Illustration: dlp projector setup in a home

For most living rooms we pick the JMGO N1S Ultimate: pixel-shifted 4K from a laser rated 3,500 ANSI lumens. Choose DLP for sharp edges in a dim room, 3LCD if rainbows bother you. We compared ten DLP models by chip size, light source and the brightness you can expect on a 100 to 150 inch screen, from maker pages and lab data.

Take this DLP, take that one, or skip DLP

  • Get the JMGO N1S Ultimate if the room keeps some light and you want a 9.9 lb laser with no mount. The XGIMI Horizon 20 Max is the step up when you game or watch with lamps on: 5,700 ISO lumens rated (3,312 ANSI measured) and 2 ms of lab-measured lag at 1080p/240 against 1 ms rated.
  • Get the Valerion VisionMaster Max if the room goes dark and you want lens zoom (1.67x), lens control and Dolby Vision on a 25,000 hour laser.
  • Get the Optoma UHD38x if you want a 4K signal at the lowest entry cost and accept a 4,000 hour lamp (15,000 hours in Eco).
  • Get the BenQ X3100i if you game in a dim room and want an LED light source rated 20,000 hours (30,000 in Eco).
  • Skip DLP if rainbows bother you or you watch in a bright room where color matters. Then take a 3LCD model such as the Epson Home Cinema 2350 (2,800 ISO lumens for both white and color, about 2,000 ANSI measured by GearLab) from our Epson projector guide.

Our picks at a glance

Quick answer: what to know before you buy a DLP projector

  • DLP means Digital Light Processing. A Texas Instruments chip with tiny mirrors builds the picture.
  • Most home DLP projectors use one chip. That is why they are small, and why a few viewers see brief rainbow flashes.
  • Chip size runs from 0.23 inch to 0.66 inch. The 0.47 inch chip is the usual 4K choice, with a 1,920 x 1,080 mirror array shifted four times per frame.
  • Light source decides life. Lamps are rated 4,000 hours (15,000 in Eco), LEDs 20,000 to 30,000 hours, RGB lasers 25,000 to 30,000 hours.
  • Rated lumens are a ceiling. Reviewers measured 2,478 ANSI on a BenQ rated 3,200, and 2,533 on a Valerion rated 3,500 ISO.
  • We have not tested any of these. We read maker pages, Texas Instruments and ProjectorCentral lab data, and we say where they disagree.

What does DLP mean in a projector?

DLP stands for Digital Light Processing, a display technology from Texas Instruments built around a chip covered in microscopic mirrors. Each mirror is one pixel (or one quarter of a pixel on a 4K model that shifts) and tilts toward the lens or away from it many times per second.

What is DLP projector technology?

It is the mirror-chip way of making a projected picture. Texas Instruments calls the chip a DMD, a digital micromirror device. The projector's maker buys the chip, adds a light source, a lens and electronics, and sells the result under its own name: BenQ, Optoma, JMGO, XGIMI, Valerion and Hisense all do.

Three short answers for the questions people type. "DLP" is the letters of Digital Light Processing. A "DLP projector" is any projector that uses that chip. "DLP projection" is the picture that chip makes, which is why DLP also appears in some rear-projection TVs and cinema projectors. For the long definition, read what is a DLP projector.

How does the mirror chip build a picture?

A light source shines on the mirror chip, the mirrors steer light toward the lens or into a trap, and the lens throws the result on the screen. A mirror that stays "on" longer in each frame looks brighter, so gray is made by timing, not by a gray mirror.

A single chip cannot show red, green and blue at once. It shows them one after another, so fast that your eye blends them. A spinning color wheel does this on lamp models; LED and laser models switch the colored light itself. The full light path, with lens and screen, is on our how a projector works page.

DLP, 3LCD or LCD: which one fits your room?

DLP gives crisper edges and deeper blacks in a dark room; 3LCD gives equal white and color brightness and no rainbow effect. Epson, which makes 3LCD, says a 1-chip DLP spec may reflect white light only, and it publishes a comparison of 750 color lumens against 2,700 white lumens for a competitor. That is a maker claim, not a lab test, so read it as a reason to check, not as a measurement.

On ProjectorCentral's spec pages the contrast ratings are not measured values. The Epson Home Cinema 2350 lists 35,000:1 dynamic and the Home Cinema 3800 lists 100,000:1 dynamic. The Optoma UHD38x lists 1,000,000:1 and the BenQ X3100i 600,000:1, also dynamic. Dynamic ratings follow each maker's own rules, so they do not compare across brands.

QuestionDLP (one chip)3LCD (three panels)Cheap LCD (one panel)
How is color made?One chip, colors shown in sequenceLight split into red, green, blue, three panelsOne panel with color filters
Rainbow effectPossible for sensitive viewersNone, per Epson and ProjectorCentralNone
Color brightnessCan be lower than white brightnessEqual to white (Epson 2350: 2,800 ISO lm both)Varies by model
Edge sharpnessNo gap between pixels, sharp edgesA thin grid can show up closeGrid and softer edges more often
SizeSmall, down to 2.9 lb (XGIMI MoGo 4)Larger, 9.0 lb (2350) to 15.2 lb (3800)Often small
Light life on our examples4,000 h lamp to 30,000 h laser3,500 to 4,500 h lamp (3800, 2350)Often lamp or LED, unrated

Sources: ProjectorCentral Epson Home Cinema 2350, Home Cinema 3800, maker pages, our reading. The LCD column is general, not a measurement.

Which is better, a DLP or an LCD projector?

Neither wins everywhere. DLP is better if you watch in the dark, want a small body or want a 4K chip at a laser's price. 3LCD is better if you watch with some light, hate rainbows or care about vivid color. The deeper comparison, with a pick for each, is on DLP vs LCD.

The brightest measured 3LCD we cite, the Epson Home Cinema 3800, hit 2,912 ANSI lumens in its brightest mode at ProjectorCentral. The best-measured DLP in this guide, the BenQ X3100i, hit 3,361 ANSI at full white.

What is a DLP and LCD projector?

That phrase mixes two different imaging technologies, not one hybrid. A DLP projector uses mirrors; an LCD projector uses liquid crystal panels, usually three of them (3LCD). Pick one: the question is which fits you, and the table above answers it. For LCD-only picks, see LCD projector.

Is a DLP projector better than LCD?

Not by default. Of the specs you can read, DLP wins on size and often on contrast, and 3LCD wins on color light output and rainbow freedom. Epson also says 3LCD models used less electricity per lumen in its own averages, a claim we could not check against a lab.

What are the light sources: lamp, LED or laser?

The light source sets how long the projector lasts, how loud it is and how fast it warms up; it does not change what DLP means. The chip works the same in all of them.

A lamp is the cheapest and brightest per dollar, and it fades: 4,000 hours, or 15,000 in Eco on the Optoma UHD38x. An LED lasts 20,000 to 30,000 hours on the BenQ X3100i but is dimmer per watt. A laser, RGB or blue laser with phosphor, lasts 20,000 to 30,000 hours on our models and keeps color vivid.

SourceModels hereRated lifeBrightness staysRainbow note
LampOptoma UHD38x, Optoma HD146X, BenQ HT3550i (discontinued)4,000 h, 15,000 h EcoDrops as the lamp agesColor wheel, can show rainbows
LEDBenQ X3100i, XGIMI MoGo 420,000 to 30,000 h (X3100i)SteadyReviewer saw brief rainbows on X3100i
Laser/LED hybridXGIMI Horizon S Pro20,000 hSteadyNot reported
Laser with phosphorBenQ TK710STi20,000 h, 30,000 h EcoSteadyReviewer saw brief rainbows on TK710
RGB laserJMGO N1S Ultimate, Valerion VisionMaster Max, XGIMI Horizon 20 Max, Hisense PX3-Pro25,000 to 30,000 hSteadyNot reported

Sources: ProjectorCentral spec pages; reviews of the BenQ X3100i and TK710. XGIMI does not list life for the Horizon 20 Max on ProjectorCentral.

Some sellers say LED and laser DLP remove the rainbow effect, and the reviews do not support that. ProjectorCentral's reviewers still caught a brief rainbow on a BenQ LED model (the X3100i, on the white-on-black shot in Gravity) and a BenQ laser model (the TK710, on white subtitles over black). Both reviewers saw none in normal viewing. Treat LED and laser as a lower risk we cannot quantify, not as zero.

Do DLP projectors have lamps?

Some do, some do not. The Optoma UHD38x and Optoma HD146X use lamps rated 4,000 hours (15,000 in Eco). Every other model in this guide uses an LED or a laser. A lamp model costs less up front, but at four hours a day a 4,000 hour lamp lasts about 2.7 years (1,000 days), against 13.7 years for 20,000 hours (our calculation).

What is a DLP laser projector?

It is a DLP projector whose light source is a laser: either RGB lasers (red, green and blue) or a blue laser that excites a phosphor. The JMGO N1S Ultimate, Valerion VisionMaster Max, XGIMI Horizon 20 Max and Hisense PX3-Pro use RGB lasers. The BenQ TK710STi uses a laser with phosphor. See our laser projector page for laser models across all chip types.

Is a DLP projector a laser projector?

Not always. DLP is the chip; laser is the light. Pair them and you get a DLP laser projector, but the Optoma UHD38x is a DLP with a lamp and the BenQ X3100i is a DLP with LEDs.

Which is better, a DLP or an LED projector?

The question compares a chip to a light source, so it needs a rewrite: do you want a DLP with an LED, or a 3LCD with an LED? An LED DLP such as the BenQ X3100i gives you the mirror chip with a 20,000 to 30,000 hour source and ANSI 3,300 rated. For LED-only models across all chip types, read LED projector.

What is a 3D DLP projector?

It is a DLP projector that accepts 3D signals; the mirror chip refreshes fast enough for it. The glasses differ by model, and none of the ten models here is sold on 3D. If 3D matters, check the spec page before buying and read 3D projector.

What is a 3-chip DLP projector?

It uses three chips, one each for red, green and blue, so no color wheel is needed and no rainbow effect appears. These projectors are cinema and venue machines, far above home size. We list none here because none of the ten models in this guide is a three-chip design.

What does DLP chip size change?

The chip size changes how many mirrors fit, how much light the chip can take and how small the projector can be. Texas Instruments sells DMDs at 0.23, 0.33, 0.47 and 0.66 inch, among others, and the mirror pitch on the three listed here is the same 5.4 microns.

Chip (TI part)DiagonalArray / outputWhat it suits
DLP230NP0.23 in (5.95 mm)960 x 540 mirrors, shows 1080pPortable and pocket projectors
DLP33100.33 in (8.47 mm)Full HD 1920 x 1080 on screenSmall form factor, low power
DLP473TE0.47 in4K UHD 3840 x 2160, 1,920 x 1,080 mirror array shiftedHome 4K, most models below
DLP660TE0.66 in4K UHD 3840 x 2160High brightness 4K

Sources: Texas Instruments product pages for the DLP230NP, DLP3310, DLP473TE and DLP660TE.

Math for the mirror count: a full 1080p picture is 2,073,600 pixels and a 4K picture is 8,294,400, four times more. A 960 x 540 array holds 518,400 mirrors, a quarter of 1080p, so TI's 0.23 inch part reaches 1080p by shifting. The same four-phase idea takes a 1080p array to 4K.

What is the DLP chip in a projector?

It is the DMD, the mirror array. Look for the size on the spec page: 0.47 inch on the XGIMI Horizon S Pro, Horizon 20 Max, Valerion VisionMaster Max, Hisense PX3-Pro and Optoma UHD38x; 0.23 inch on the XGIMI MoGo 4. ProjectorCentral's spec page does not list the chip on the JMGO N1S Ultimate, BenQ X3100i or TK710STi, and the reviewer of the X3100i reports a 0.65 inch DMD with a 1080p array.

Does a bigger chip look better?

Not by itself. A 0.65 inch chip with a 1080p array (BenQ X3100i) shows the same pixel count, shifted, as a 0.47 inch chip with a 1080p array (XGIMI Horizon 20 Max). Brightness, optics and the source decide more. The sizes matter for what the projector can fit around them: a 2.9 lb MoGo 4 cannot hold a 0.66 inch chip assembly.

Which DLP projector fits which room?

Ten DLP models, all listed as shipping on ProjectorCentral in November 2026. All are rated by their makers, so the lumen figures are ceilings.

ModelProfileRated brightnessChip / outputLight sourceWeight
JMGO N1S UltimateLiving room, no mount3,500 ANSI rated, 2,608 measuredDLP, 4K shiftedRGB laser, 30,000 h9.9 lb
XGIMI Horizon S ProValue 4K1,800 ISO0.47 in, 4K shiftedLaser/LED, 20,000 h10.5 lb
XGIMI Horizon 20 MaxBright room and gaming5,700 ISO rated, 3,312 ANSI measured0.47 in, pixel-shifted 4KRGB laser11.9 lb
Valerion VisionMaster MaxDark room, lens control3,500 ISO rated, 2,533 ANSI measured0.47 in, pixel-shifted 4KRGB laser, 25,000 h16.5 lb
Hisense PX3-ProUltra short throw3,000 ANSI0.47 in, 4KRGB laser, 25,000 h19.8 lb
BenQ X3100iGaming, dim room3,300 ANSIDLP (0.65 in per review), 4K shiftedLED, 20,000 h15.0 lb
BenQ TK710STiShort throw gaming3,200 ANSIDLP, 4KLaser phosphor, 20,000 h6.8 lb
Optoma UHD38xLowest 4K cost4,000 ANSI0.47 in, 4KLamp, 4,000 h8.8 lb
Optoma HD146XCheap 1080p3,600 ANSI0.47 in, 1080pLamp, 4,000 h6.2 lb
XGIMI MoGo 4Portable450 ISO0.23 in, 1080pLED2.9 lb

Source: ProjectorCentral spec pages for each model. We read brightness as listed; "ANSI" and "ISO" are different tests (ISO 21118 is the stricter one), so do not compare across the two columns without care.

The ten DLP projectors, one at a time

Each block says who the projector suits and who it does not. Prices are not printed here: use the Check price button for today's.

JMGO N1S Ultimate: living room, no mount

Rated 3,500 ANSI lumens, a 1.20:1 throw ratio and 4K by pixel shifting, from an RGB laser rated 30,000 hours. ProjectorCentral lists 1,600:1 full on/off contrast, two HDMI ports, a 26 dB fan, a 9.9 lb body and a September 2024 release. Reviewers measured about 2,600 to 2,800 ANSI lumens in normal modes, so plan on that.

  • Right for: a living room with some light, a 100 to 120 inch screen, and a buyer who wants no ceiling mount.
  • Not for: a viewer who wants a zoom lens (it has fixed focus with powered focus) or the highest contrast.

Check price. Full review: JMGO N1S Ultimate.

XGIMI Horizon S Pro: value 4K

A 0.47 inch DLP chip showing 4K by pixel shifting, rated 1,800 ISO lumens from a laser and LED hybrid rated 20,000 hours. ProjectorCentral lists a 1.20:1 throw ratio, 1,000,000:1 dynamic contrast, two 12 W speakers, a 10.5 lb body, a 28 dB fan and an October 2024 release.

  • Right for: a dim bedroom or den, a 100 inch screen, and a buyer who values XGIMI's setup features.
  • Not for: a room with light. 1,800 ISO lumens is the lowest rating among the 4K models here.

Check price. More XGIMI models: XGIMI projectors.

XGIMI Horizon 20 Max: bright room and gaming

5,700 ISO lumens rated from an RGB laser, a 0.47 inch DLP chip and 3 ms rated lag at 4K/60. ProjectorCentral's review measured 3,312 ANSI lumens in Movie mode, 8 ms at 4K/60, 6 ms at 1080p/120 and 2 ms at 1080p/240, and a native contrast of 1,400 to 1,640:1. The spec page lists a 1.20 to 1.50:1 throw ratio, 1.25x zoom, an 11.9 lb body (the review says 16.3 lb), a 28 dB fan, two 12 W speakers and an October 2025 release. XGIMI's laser life is not listed there.

  • Right for: a bright living room, a console, or a screen of 120 to 150 inches.
  • Not for: a viewer who wants a small body: at 11.9 lb it is heavier than the JMGO and the XGIMI Horizon S Pro, and its fan is rated 28 dB.

Check price. Full review: XGIMI Horizon 20 Max.

Valerion VisionMaster Max: dark room, lens control

3,500 ISO lumens rated, a 0.47 inch DLP chip, 5,000:1 full on/off contrast and a 1.67x zoom lens. ProjectorCentral lists two HDMI 2.1 and one HDMI 2.0 port, a 25,000 hour RGB laser, 15 ms of lag at 4K/60 on the spec page (the review measured 18 ms), a 16.5 lb body, a 28 dB fan and a November 2025 release. Reviewers measured 2,533 ANSI without the Brightness Enhancer and 3,230 in another test. The review describes the 4K picture as pixel-shifted.

  • Right for: a dark dedicated room and a shelf or mount at 6.5 to 10.9 feet for a 100 inch image.
  • Not for: a buyer who wants to move it around; at 16.5 lb it is a fixture, not a portable box.

Check price. Full review: Valerion VisionMaster Max, and the Valerion brand page.

Hisense PX3-Pro: ultra short throw

A 0.22:1 throw ratio, 3,000 ANSI lumens from an RGB laser rated 25,000 hours and a 3840 x 2160 picture. ProjectorCentral lists a 0.47 inch DLP display type and does not say whether the 4K is native or pixel-shifted. It also lists 3,000:1 full on/off contrast, one HDMI 2.0 and two HDMI 2.1 ports, a 50 W Harman Kardon system, a 19.8 lb body and an August 2024 release. It puts a 100 inch image about 1.6 feet from the wall. Input lag is not listed, only an Auto Low Latency Mode.

  • Right for: a living room where you want the projector on a cabinet below the screen and no ceiling mount.
  • Not for: a cheap upgrade. It is heavy, and an ultra short throw needs a very flat wall or an ALR screen.

Check price. See also Hisense laser TVs and ultra short throw projector.

BenQ X3100i: gaming in a dim room

3,300 ANSI lumens from four LEDs rated 20,000 hours (30,000 in Eco), a 1.15 to 1.50:1 throw ratio and 4.2 ms rated lag at 1080p/240. ProjectorCentral measured 3,361 ANSI at full white, and 2,949 at video level 235. It lists two HDMI 2.0 ports, a 1.3x zoom, plus or minus 10 percent vertical shift, a 15.0 lb body, a 32 dB fan (28 dB Eco), two 5 W speakers and Android TV. The reviewer found a 0.65 inch DMD, 96.7 percent of Rec.709 and 97.4 percent of DCI-P3 in the wide gamut mode, which costs about 40 percent of the light.

  • Right for: a dark gaming room and a console at 1080p/120 or 240 with a 100 to 120 inch screen.
  • Not for: a viewer sensitive to rainbows (the reviewer saw one on a white-on-black scene) or someone who needs 4K at 120 Hz: it has HDMI 2.0.

Check price. More on BenQ: BenQ projectors and gaming projectors.

BenQ TK710STi: short throw gaming

3,200 ANSI lumens from a laser phosphor source rated 20,000 hours (30,000 in Eco), at a 0.69 to 0.83:1 throw ratio. ProjectorCentral lists a 1.2x zoom, no lens shift, two HDMI 2.0 ports, 16.7 ms at 4K/60 and 4.2 ms at 1080p/240, a 6.8 lb body, a 31 dB fan (28 dB Eco) and a June 2024 release. Its brightness has not been measured on the STi we read. The standard-throw TK710 measured 2,478 ANSI against 3,200 rated, and 1,800:1 native contrast.

  • Right for: a small room where a short throw fits a 100 inch image from 5.0 to 6.0 feet (0.69 to 0.83 times the 87.2 inch screen width, our calculation).
  • Not for: an ultra short throw cabinet setup. 0.69:1 is short, not ultra short; read short throw projector.

Check price.

Optoma UHD38x: lowest 4K cost

4,000 ANSI lumens from a lamp rated 4,000 hours (15,000 in Eco) and a 0.47 inch DLP chip showing 3840 x 2160. ProjectorCentral lists a 1.50 to 1.66:1 throw ratio, 1.1x zoom, no lens shift, two HDMI 2.0 ports, 4.2 ms at 1080p/240, a 8.8 lb body, a 28 dB fan (26 Eco) and 10 W mono sound. The release is December 2022.

  • Right for: a bright room, a console and a buyer who wants 4K at the lowest entry cost and can replace a lamp.
  • Not for: anyone who hates ongoing costs; a lamp wears out, and there is no lens shift for off-center mounts.

Check price.

Optoma HD146X: cheap 1080p

3,600 ANSI lumens, 1080p on a 0.47 inch DLP chip and a lamp rated 4,000 hours (15,000 in Eco). ProjectorCentral lists 25,000:1 full on/off contrast, a 1.47 to 1.62:1 throw ratio, 1.1x zoom, no lens shift, a 6.2 lb body, a 26 dB fan and a 3 W mono speaker. It dates from February 2020 and shows 16 ms lag at 1080p/60.

  • Right for: a first projector for a living room with light, where 1080p is enough on a 100 inch screen.
  • Not for: HDR fans or anyone who wants a smart system; the HD146X has a 3 W mono speaker and ProjectorCentral lists no smart system. See cheap projector.

Check price.

XGIMI MoGo 4: portable

A 0.23 inch DLP chip, 1080p, 450 ISO lumens from an LED and a 2.9 lb body with a 2 hour battery. ProjectorCentral lists two 6 W speakers, a 28 dB fan and a June 2025 release. It is a night-time, small-screen projector, not a living room one.

  • Right for: travel, a bedroom wall or a camp at 60 to 80 inches.
  • Not for: any room with light, since 450 ISO lumens gives about 15 fL on a 100 inch screen (our calculation).

Check price. See portable projector and mini projector.

How bright will each DLP look on your screen?

Divide measured ANSI lumens by the screen area in square feet and you get footlamberts for a 1.0 gain screen. A 100 inch 16:9 screen is 29.7 square feet; 120 inches is 42.7; 150 inches is 66.8.

Model and figure100 in120 in150 in
JMGO N1S Ultimate, 2,600 ANSI (low reviewer figure)88 fL61 fL39 fL
JMGO N1S Ultimate, 2,800 ANSI (high reviewer figure)94 fL66 fL42 fL
Valerion VisionMaster Max, 2,533 ANSI85 fL59 fL38 fL
Valerion VisionMaster Max, 3,230 ANSI109 fL76 fL48 fL
XGIMI Horizon 20 Max, 3,312 ANSI (Movie mode)112 fL78 fL50 fL
BenQ X3100i, 3,361 ANSI full white113 fL79 fL50 fL
BenQ X3100i in wide gamut mode (about 40 percent less)68 fL47 fL30 fL
Optoma UHD38x, 4,000 ANSI rated135 fL94 fL60 fL
XGIMI MoGo 4, 450 ISO rated15 fL11 fL7 fL

Our calculation. Screen gain of 1.0, no ambient light, and the Optoma and XGIMI figures are rated, not measured. Real pictures sit in a darker mode.

A dark room needs far fewer footlamberts than a room with lamps on. As our rule of thumb, aim above 60 fL when light is on, which is where the Optoma and the 100 inch BenQ sit. That is why the Valerion at 150 inches (38 fL) is a dark-room pick, and the XGIMI Horizon 20 Max (5,700 ISO rated, 3,312 ANSI measured) is the bright-room one. How many lumens you need explains the difference.

How to choose a DLP projector in six steps

Pick the room first, then the light source, then the chip, then the ports. That order avoids buying a 4K chip for a room that cannot show it.

  1. Measure the room light. A dark room works with 1,800 ISO lumens (XGIMI Horizon S Pro); a room with lamps on wants 4,000 ANSI (Optoma) or 5,700 ISO (XGIMI Horizon 20 Max).
  2. Choose the screen size. At 100 inches the Horizon S Pro gives about 61 fL if 1,800 were measured; at 150 inches it drops to 27 fL (our calculation).
  3. Choose the light source. Lamp for the lowest price and a 2.7 year life at 4 hours a day; LED or laser for 13.7 to 20.5 years.
  4. Choose the chip. 0.23 inch for portable 1080p, 0.47 inch for 4K shifted, 0.65 or 0.66 inch for higher brightness 4K. The label "4K" does not say how the picture is made; see 4K projector.
  5. Check the ports. HDMI 2.1 for 4K at 120 Hz (JMGO N1S Ultimate has two HDMI, the Valerion has two 2.1, the Hisense has two 2.1); HDMI 2.0 caps you at 4K/60.
  6. Check rainbow risk. If you saw rainbows in a cinema or on a friend's projector, try the model in a shop, or choose a 3LCD from our Epson page.

The ports and lag figures below are the ones ProjectorCentral lists or measured. Rows with no figure say so, because we do not guess.

ModelHDMI ports listedRated lag, best modeFan noise
XGIMI Horizon 20 Max2Rated 1 ms at 1080p/240 and 3 ms at 4K/60; measured 2 ms and 8 ms28 dB rated; 33.7 to 34.0 dBA measured
BenQ X3100i2 x HDMI 2.04.2 ms at 1080p/240, 16.7 ms at 4K/6032 dB (28 Eco)
BenQ TK710STi2 x HDMI 2.04.2 ms at 1080p/240, 16.7 ms at 4K/6031 dB (28 Eco)
Optoma UHD38x2 x HDMI 2.04.2 ms at 1080p/24028 dB (26 Eco)
Valerion VisionMaster Max2 x HDMI 2.1 and 1 x HDMI 2.0Listed 4 ms at 1080p/240 and 15 ms at 4K/60; measured 5 ms and 18 ms28 dB rated; 34.7 to 35.3 dBA measured
Hisense PX3-Pro2 x HDMI 2.1 and 1 x HDMI 2.0not listed (ALLM only)not listed
JMGO N1S Ultimate2not listed26 dB

For the screen distance of a given image, use the throw distance calculator. For what a short throw changes, read short throw projector.

Is a DLP projector good?

Yes, for a dim room, a small body and sharp pixels; no, for a viewer who sees rainbows or a room full of light. ProjectorCentral's X3100i review measured 97.4 percent of DCI-P3 in the wide gamut mode, and lists 4.2 ms rated lag at 1080p/240. Its TK710 review calls the black levels "slightly below average". So good means good at specific jobs.

Are DLP projectors the best?

No single technology wins. DLP wins on size and edge sharpness, 3LCD on color brightness, and native 4K SXRD or D-ILA on black level, at a higher price (the Sony VPL-XW5000ES is one). Our 4K projector and home theater projector guides cover that side.

How much is a DLP projector?

We do not print prices because they move and we have no US price feed. Lamp models (Optoma UHD38x, HD146X) cost the least, LED and laser 4K models more, and the heavy ultra short throw models most. Use Check price on a model for today's figure. Cheapest picks: cheap projector.

Is a DLP projector hard on the eyes?

We found no maker or lab source that ties DLP to eye strain. The related, documented problem is the rainbow effect: Epson says it is caused by the color wheel in single-chip DLP, and two ProjectorCentral reviewers caught brief rainbow flashes on BenQ models in specific scenes. If you get headaches or see color streaks, try 3LCD.

How to use, connect and care for a DLP projector

A DLP projector sets up like any other: place it, aim it, focus, then fix the shape. The steps do not change with the chip.

How to use a DLP projector

Plug in power, connect a source by HDMI or the built-in apps, aim at the screen and focus. Use keystone only if you must, because it shrinks the image pixels. The whole walkthrough is in how to use and set up a projector.

How to connect a DLP projector to a laptop

Use an HDMI cable, or USB-C if the projector has it, then choose the projector as a display in Windows (Win + P) or macOS Displays. Most of the ten models here have HDMI. If you get a blank picture, read how to connect a projector to a laptop.

How to clean a DLP projector

Unplug it, let it cool and wipe the lens with a clean, dry microfiber cloth; blow dust off the vents with canned air or a blower. Do not spray liquid on the lens. If the picture looks soft, the cause is often focus, not dirt: see why is my projector blurry.

How to open an Optoma DLP projector

Do not open the case unless the manual says so. Lamp models such as the Optoma UHD38x and HD146X have a lamp door for changing the lamp, with the power unplugged and the lamp cool. Leave the chip assembly alone: dust on the mirrors cannot be wiped off, and a maker may refuse warranty service on an opened case.

How many years will the light source of a DLP projector run?

The light source sets it: about 2.7 years at 4 hours a day for a 4,000 hour lamp, and 13.7 to 20.5 years for 20,000 to 30,000 hour LEDs and lasers (our calculation). Eco mode stretches a lamp to 15,000 hours (10.3 years). The chip is not the limit. The table converts each rating into years at 4 hours a day.

Light sourceRated hoursDays at 4 h a dayYears
Lamp, normal4,000 h1,0002.7
Lamp, Eco15,000 h3,75010.3
LED or laser, normal20,000 h5,00013.7
RGB laser25,000 h6,25017.1
RGB laser, JMGO N1S Ultimate30,000 h7,50020.5

Our calculation from ProjectorCentral ratings. A rating is a maker estimate for the time until brightness falls to a set level, not a guarantee. Read how long projectors last for more.

DLP projector brands in this guide

BenQ and Optoma are the two lamp and LED specialists here, with the X3100i, TK710STi, UHD38x and HD146X. JMGO, XGIMI, Valerion and Hisense lead the laser models. Acer, ViewSonic and other brands also sell DLP, but we did not verify their specs for this page, so we do not list them. For brand pages, see XGIMI, JMGO, Valerion and Epson for the 3LCD alternative.

The pilier projector places these ten among the wider field.

Why you may see rainbows, flicker or dead pixels

  • Rainbow effect. Brief color flashes on white-on-black scenes, per the BenQ X3100i and TK710 reviews. Sit farther back, lower brightness or switch to 3LCD.
  • Flicker. Often an HDMI or refresh setting. We found no DLP-specific cause in the sources.
  • Dead pixels. A mirror stuck on or off can leave a dot. We found no maker page that lists a rate, so we cannot say how often it happens.

FAQ

What does DLP projector mean?

It means a projector using Texas Instruments' Digital Light Processing mirror chip. The projector's maker adds the light source and lens.

What does DLP projector stand for?

Digital Light Processing. The mirror chip is called a DMD, a digital micromirror device.

Can a DLP projector be used in daylight?

Yes if it is bright. The XGIMI Horizon 20 Max is rated 5,700 ISO lumens and measured at 3,312 ANSI in Movie mode, and the Optoma UHD38x is rated 4,000 ANSI. Read projector for daylight.

Is DLP better for gaming?

Often. XGIMI rates the Horizon 20 Max at 3 ms at 4K/60 and ProjectorCentral measured 8 ms; BenQ rates the X3100i at 4.2 ms at 1080p/240 and the lab measured 5 ms. See gaming projector.

Do DLP projectors work in a bedroom?

Yes in a dim one. A 1,800 ISO lumen model such as the XGIMI Horizon S Pro fits a 100 inch wall. See projector for bedroom.

Can a DLP projector replace a TV?

On a 100 inch or larger image, yes in a dark room. In light, a TV is simpler: projector vs TV.

Does a DLP projector need a special screen?

No. A white wall or a white screen works, and an ultra short throw like the Hisense PX3-Pro works best with an ALR screen.

Is a DLP chip the same as a 4K chip?

No. A 0.47 inch DLP with a 1,920 x 1,080 mirror array shifted four times per frame fills a 3840 x 2160 image, and a 0.23 inch part shifts too. The label tells the signal, not the method.

Do DLP projectors use a color wheel?

Lamp models do, as Epson says of single-chip DLP. We could not confirm from the maker pages how each LED, laser and phosphor model sequences its colors, so we do not state it.

Can I put a DLP projector on a ceiling?

Yes, if it has a mount. The BenQ X3100i has plus or minus 10 percent vertical shift and the Valerion VisionMaster Max has plus or minus 55 percent. See ceiling mounted projector.

Are 3-chip DLP projectors better?

For color and rainbows yes, but they are cinema machines, not home models.

How loud is a DLP projector?

26 to 32 dB rated on our models: 26 dB for the JMGO N1S Ultimate, 28 dB for the XGIMI, Valerion and BenQ in Eco and 32 dB for the X3100i at full output. Labs measured 33.7 to 44.6 dBA at about 3 feet on the models they tested.

Sources